Muratec MFX-2530 Operating Instructions Manual page 82

Advanced fax
Changing a one-touch number
1
Press , , [Enter].
MENU A
The shows the one-touch number list.
LCD
2
Select the one-touch key you want to change a
previously stored number.
Note: You can select the one-touch key by
pressing that key on the control panel.
Note: You can press [Detail] to see the number which has been pro-
grammed in that one-touch key.
3
Press [Enter].
4
The previously stored number will be shown on
the . If you want to change this number,
LCD
press [Clear] to erase it and then enter
another number by using the numeric keypad.
The number can be up to 40 characters in
length.
5
When the number is as you want it, press [Enter] to store it.
6
If you want to change Location
number or Group number, enter them as
described in steps 7–15 on page 3.13.
Note: If you want to change the previously
entered one, press [Clear] to erase it.
Note: If you want to omit these settings,
go to step 7.
7
Press [Exit].
If you do want to change another one-touch number, go back to step 2.
If you do not want to change any more one-touch numbers, press
ish.
Use the autodialer labels in your fax's packaging to write down the stored
numbers for easy reference.
If you have entered the group number, you can also print out a directory of
your call groups. (See page 3.22.)
3.14
All manuals and user guides at all-guides.com
A.One-Touch Dial
Select one-touch. (01-78)
01:New York Office
02:Los Angeles Office
03:Chicago Office
04:London Office
05:Paris Office
Detail Erase
01:123-4567
Enter fax number.
_
123-4567
Location:New York Office
Alt.No. :123-9876
GroupNo.:1
- Clear
01:123-4567
Use cursor to select
, Alternative
ID
item.
Location:New York Office
Alt.No. :123-9876
GroupNo.:1
Exit
** Helpful Tip *****************************
Pressing the one-touch key you want to change
mode, you can also change the one-touch numbe
1
Keep pressing the one-touch key you want
change until this
Note: Be careful not to press it too short
Enter
2
Press [Enter].
3
Follow steps 4–7 in "Changing a one-touch
********************************************
Erasing a one-touch number
1
Press
Enter
The
2
Select the one-touch key which you want t
Note: You can select the one-touch key b
Note: You can press [Detail] to see the n
3
Press [Erase]. The
Important: If you want to quit without
Enter
4
Press [Erase] to erase the number.
to fin-
RESET
To erase another one-touch number, repeat step
Or press
appears:
LCD
The machine might perform a tran
sion.
, , [Enter].
MENU A
shows the one-touch number list.
LCD
panel.
grammed in that one-touch key.
shows (see right):
LCD
ing the one-touch number y
selected, press [Cancel]. Th
will return to step 2.
to return to standby mode.
RESET