Muratec MFX-2530 Operating Instructions Manual page 160

Common settings
Sending a fax using a department code
For this operation to work, two things must be true:
• The four-digit department code must exist on your fax machine.
• You must know the department code or department ID.
1
Place the document and select resolution and contrast you require.
2
Enter the fax number by either pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad.
If you enter the fax number using a one-touch key, skip to step 4.
Otherwise, go on to step 3.
3
Press .
START
4
If you select the department code for the department mode in the previous
column, proceed to step 5.
If you select the department ID for the department mode, skip to step 6.
5
Use the numeric keypad to enter the appropri-
ate four-digit department code.
Skip to step 7.
6
Use the one-touch keys or the numeric keypad
to enter the appropriate department ID.
7
Press [Enter].
4.14
All manuals and user guides at all-guides.com
Transmission
Enter department code.
0000
123-4567
Transmission
Enter department ID.
_
123-4567
Clear
Making a copy using a department co
For this operation to work, two things must be t
• The four-digit department code must exist on
• You must know the department code or depa
Note: If you press [No Copy] in step 4 or 5 be
print a list without entering the departm
1
Place the document and set any settings y
2
Use the numeric keypad to enter the num
3
Press
START
If you select the department code for the d
step 4.
If you select the department ID for the de
5.
4
Use the numeric keypad to enter the appr
ate four-digit department code.
Skip to step 6.
Enter
5
Use the one-touch keys or the numeric ke
to enter the appropriate department ID.
Enter
6
Press [Enter].
.