Muratec MFX-2530 Operating Instructions Manual page 64

Copy settings
02. Width of the separator line
Default setting: 0.01 inch
You can change the width of the separator line in the Combine and Repeat function.
The default setting is 0.01 inch, but you can change it to within 0.01 – 0.05 inch in
0.01 inch steps.
1
Press , [Copy Set].
MENU
2
Select "E. User Settings" and then press [Enter].
3
Select "02. Separator Line Width" and then press [Enter].
4
Enter the width of the separator line you want
to set to default.
5
Press [Enter] to save the setting.
6
Press to return to standby.
RESET
03. Auto reset mode
Default setting: Auto reset time: 3 minutes, Reset after scan: OFF
The machine returns to its initial condition automatically after a certain period of
time. You can change this time from 1 to 10 minutes. Also, you can set the machine
to return to its initial condition soon after finishing to scan.
Note: The machine first resets the
resets the key settings to the initial condition.
1
Press , [Copy Set].
MENU
2
Select "E. User Settings" and then press [Enter].
3
Select "03. Copy Panel Reset" and then press [Enter].
4
Select "Auto reset time" and then press
[Enter].
5
Enter the time for auto resetting, and then
press [Enter] to save the setting.
2.28
All manuals and user guides at all-guides.com
Separator Line Width
Set width of line.
0.01"
Line width
display, and after certain period of time it
LCD
Copy Panel Reset
Set auto reset time.
After 3 min.
Auto reset time
Reset after scan : OFF
Exit
6
Select "Reset after scan" and then press
[Enter].
7
Select "ON" or "OFF" then press [Enter
save the setting.
8
Press [Exit] to finish.
Press
04. Last Job Hold Time
Default setting: 0 minute
(0.01-0.05)
:0.01"
Your machine can hold the last scanned data of
change that time here.
Note: If it is 0 minute, the Last Job feature wil
Enter
1
Press
2
Select "E. User Settings" and then press
3
Select "04. Last Job Hold Time" and th
press [Enter].
4
Enter the time for holding the scanned da
the Last Job feature.
5
Press [Enter] to save the setting.
6
Press
(1-10)
: 3min.
Enter
to return to standby.
RESET
, [Copy Set].
MENU
to return to standby.
RESET