Muratec MFX-2530 Operating Instructions Manual page 127

9
Use the numeric keypad to enter the appropri-
ate - password for the box.
ITU T
Note: If there isn't a
ITU
box, skip to step 10.
10
Press [Enter].
11
If you want the F-Code polling to begin immedi-
ately every time you press the key, press [Exit] and skip to step 14.
If you want to delay the F-Code polling, select "Delayed Tx" and press
[Enter].
12
Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a
certain time on a certain day of
the month. (For example, "Do this
at 5:05
PM
To select this option, use the
numeric keypad to enter the date
and time when the fax should
perform the command.
Option 2: Perform the command at a cer-
tain time each day you press the
key. (For example, "Do this at 5:05
today.")
PM
To select this option, use the
numeric keypad to enter 0, 0 and
then the time the fax should per-
form the command.
13
Press [Enter], [Exit].
14
The machine will return to step 2.
Note: When the F-Code transmission is programmed, the
appear in the programmable one-touch number list on the
Note: When the delayed transmission is programmed, the
appear in the programmable one-touch number list on the
If you want to enter or change another key's programming, repeat steps 2-14.
If you do not want to enter or change any other key's programming, press
. Your machine returns to standby mode.
RESET
All manuals and user guides at all-guides.com
F-Code Polling
Enter password.
_
SubAddress :123-4567
Password
- password for this
T
Delayed Tx
Enter Trnsmit Time
30/17:05
on the 30th.")
Delayed Tx
Enter Trnsmit Time
00/17:05
Erasing a programmable one-t
1
:
2
Clear Enter
3
4
To erase another programmable one-touch num
Clear Enter
Or press
Printing a list of your program
You fax machine can print a list of the command
ble one-touch keys.
The list includes:
Clear Enter
symbol will
.
LCD
To print a list of programmable one-touch keys,
symbol will
.
LCD
Press , , [Enter].
MENU C
The shows the programmable one-tou
LCD
Select the programmable one-touch key w
Note: You can select the programmable
on the control panel.
Note: You can press [Detail] to see the n
grammed in that key.
Press [Erase]. The shows:
LCD
Important: If you want to quit without
ing the one-touch number y
selected, press [Cancel]. Th
will return to step 2.
Press [Erase] to erase the programmable
touch number.
to return to standby mode.
RESET
(1) each key's one-touch number
(2) the fax/telephone number
(3) when the command should start
(4) which command you've selected
(5) if applicable, the selected call group(
the key
(6) the individual settings for each key