Muratec MFX-2530 Operating Instructions Manual page 150

Common settings
4
The shows:
LCD
If you want to overwrite the operation already
programmed, press [Yes].
If you do not want to overwrite the key you
have chosen, press [No] and go back to step 2.
5
The of copy standby mode appears, which
LCD
means the machine is ready to register the
steps into the Macro key.
Note: It keeps beeping and blinking the
or key during the job registration in
FAX
order to make notice of the registration
mode.
6
Press the keys exactly as you operate the job you want to program into the
Macro key.
Note: If you want to program the fax function, first press
want to program the copier function, first press
Note: You can program up to 60 steps. When it comes over 60 steps, your fax
machine asks if you register the operations you have entered. If you
want to register them, press [Yes]. If not, press [No].
Note: If you want to cancel the operations you have set, press
then go back to step 1.
7
If you programmed Start or [Enter] into the operation, proceed to step 8.
Otherwise, press
MACRO PROGRAM
8
If you want to start immediately after pressing
the Macro key when you use it, press [Yes]. If
not, press [No].
Note: If you want to confirm the settings or
operations in the Macro key before the
machine do it, press [No] here.
4.4
All manuals and user guides at all-guides.com
Macros
Over Write?
M1:AABBCC
M2:BBCCDD
M3:EEFFGG
M4:Not Stored
M5:Not Stored
Copy Ready
COPY
Paper
FAX
COPY
and skip to step 9.
Macros
Include Start/Enter?
9
10
Yes No
Set
1
100%
Erasing a Macro key
1
Zoom Sort
2
. Or, if you
.
3
and
RESET
4
To erase another Macro key, repeat steps 2–4. O
mode.
Printing a list of your Macro keys
Your fax machine can print a list of the comman
keys.
Yes No
The list includes:
To print a list of Macro keys, press
The machine now asks you to name this jo
Enter the name of this job.
A job's name may be up to 130 characters
length.
If you do not want to enter or change this
name, skip to step 10.
Press [Enter] to save the setting.
The machine will return to standby mode
To program or modify another job, repeat
Press , .
MACRO PROGRAM NEXT
Select the Macro key ( 1 – 6) you want t
M M
erase.
Press [Erase]. The shows:
LCD
Note: If you want to quit without erasin
Macro key you've selected, press
[Cancel]. The fax will return to st
Press [Erase] again to erase the job.
(1) each key's Macro key number
(2) the name of the job stored in the Ma
MACRO PROG