Muratec MFX-2530 Operating Instructions Manual page 85

Entering a speed-dial number
1
Press , , [Enter].
MENU B
The shows the speed-dial number list.
LCD
Note: Pressing the
SPEED DIAL
few seconds from the standby mode, you
can also enter a speed-dial number.
2
Select the speed-dial number in which you
want to store a number.
Note: You can select the speed-dial number by directly entering that three-
digit identifier code. When entering the identifier code for speed-dial
numbers less than 100, you must enter leading zeroes to make three
digits. For example, 001-099.
3
Press [Enter].
4
Use the numeric keypad to enter the number
exactly as your machine should dial it, includ-
ing whatever access codes your phone system
requires. (You may want to review "Special dial-
ing characters," page 3.11.) The number can be
up to 40 characters in length.
Note: You must enter the fax number to pro-
gram the speed-dial number.
Note: If want to erase characters, press [Clear] to erase to the left.
If you want to change just one character in the number, move the cur-
sor to that character, and press [Clear] to erase it. Then re-enter the
character correctly.
5
When the number is as you want it, press [Enter] to store it.
All manuals and user guides at all-guides.com
B.Speed Dial
Select speed-dial(001-222)
001
001:
002:
/ for a
TEL INDEX
003:
004:
005:
Detail Erase
001:
Enter fax number.
_
Location:
Alt.No. :
GroupNo.:
- Clear
6
Next, the
You can also program the following three
• Location
destination name. If you enter the nam
can use the EasyDial directory dialing f
tion (see page 3.22).
• Alternative number — After all redi
Enter
attempts to the regular number fail, yo
native number. If the alternative numb
alert you of a problem.
Note: Your fax holds a maximum of 1
• Group number — If you enter the gr
dial transmission function. (See "Using
Note: If you wish to omit these settings,
7
To enter the Location
Select the "Location" and press [Enter]
Enter
8
Enter the Location
the character, see "Entering character" on
1.15.) A number's Location
characters in length.
9
Press [Enter] to save the setting.
10
To enter the Alternative number:
Select the "Alt.No" and press [Enter].
11
Enter the alternative number using the
numeric keypad. The number can be up to
characters long.
12
Press [Enter] to save the setting.
now displays (see right):
LCD
("Location" on the ) —
ID LCD
only 10 speed-dials or one-touch
number. After you have entered
speed-dials or one-touch numbe
enter the alternative number.
:
ID
. (Regarding how to
ID
may be up t
ID