Passwords Button; Standardize Button; Settings, Language, Data, And Alarm Butons; Done Button - ATS Pyro-Clean Instruction Manual

Passwords Button

Will not be displayed until the correct ID and Password has been entered. Once it is displayed, pressing it will go to
the password screen. (Default ID: 2, Password: 222222).

Standardize Button

Will not be displayed until the correct ID and Password has been entered. Once it is displayed, pressing it will go to
the standardize screen. (Default ID: 3, Password: 333333).

Settings, Language, Data, and Alarm Butons

Each take you to their screens which are described later in this section.

Done Button

Returns you to the Main Screen.
E.4 Language Screen
Figure E.13 shows the Language Screen that is shown when you press the Language Button on the View Screen. It
allows you to set the language used in all the screens.
Figure E.13 - Language Screen
Simply select your language of choice then press the Done Button to go back to the View Screen.
22 MAN - Pyrolytic Oven - REV: Original | E. Software Overview