Leakwise ID-220 SERIES User Manual page 50

5.
Low Battery Threshold for Warning: For battery operated units. A warning will be sent if
battery voltage decreases below this value.
6.
Low Battery Threshold: Save Power: For battery operated units. The SLC-220 will enter
a power save mode and will not monitor the sensors. The idea is not to drain the battery
too much. Power save mode will continue until battery voltage rises above this value.
7.
Sensor + Supply Upper Legal Limit: Maximum allowed current consumption through the
positive sensor wire.
8.
Sensor + Supply Lower Legal Limit: Minimum allowed current consumption through the
positive sensor wire.
9.
Sensor - Supply Upper Legal Limit: Maximum allowed current consumption through the
negative sensor wire.
10.
Sensor - Supply Lower Legal Limit: Minimum allowed current consumption through the
negative sensor wire.
SLC-220 User Guide Rev 2.0
50
June 2018