Leakwise ID-220 SERIES User Manual page 25

25
A new type of Lights board (DWG S SLC 003 2) will be installed during 2018. It supports both
Common and Individual modes, therefore mode change will be very quick and easy. The board
has JP11 MODE jumper to select between the modes.
To use the Common mode, install the board with its' right side above the black Lights panel.
To use Individual mode, install the board with its' left side above the black Lights panel.
New Type of Lights Board:
On-Board Buzzer:
Shoring jumper JP1 near the on-board buzzer (and TB6) enables the buzzer.
The buzzer will beep one after a successful parameters update done through the LCD display or
through the SLC-Manager PC program. It will beep multiple times if there are problems in the
parameters, which will then be rejected.
SLC-220 User Guide Rev 2.0 June 2018