Indicator Flash Confirmation / Codes; Chirp Confirmation / Codes; Dash Mounted Warning Light (Led) - Mongoose M20 Owner's Operation Manual

Suitable for 12volt, 24 volt negative ground vehicles
Hide thumbs Also See for M20:
Table of Contents

Advertisement

INDICATOR FLASH CONFIRMATION / CODES

This is a visual indication of system status.
A) 1 Flash - Armed
B) 2 Flash - Disarmed

CHIRP CONFIRMATION / CODES

This is an audible indication of system status.
A) 1 Chirp - Armed
B) 2 Chirps - Disarmed
C) 3 Chirps - Door, bonnet & boot open when arming
D) 4 Chirps - Disarm and indicates the alarm has been triggered
E) Fast chirps - Light impact detected by the shock sensor
DASH MOUNTED WARNING LIGHT - LIGHT EMITTING DIODE (LED)
Located on or near the dashboard area, the LED is a small flashing light that indicates the vehicle is fitted with a
security system. The LED also tells the status of the alarm;
A) Slow flashing
- System armed
B) Fast flashing
- Automatic last door arming countdown
B) LED off
- System off
C) Continuously lit - Valet mode
D) 1 flash, 1 pause - Door, bonnet or boot triggered
E) 2 flash, 1 pause - Sensor triggered
F) 3 flash, 1 pause - Ignition triggered
If you disarm the alarm and hear 4 chirps, the alarm has been triggered. By reading the flash codes above, you
can determine which circuit has been triggered.
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M20sM24

Table of Contents