Disarming The System; Vehicle Lights On Warning; Automatic, Last Door, Arming; Doors, Bonnet & Boot - Mongoose M20 Owner's Operation Manual

DISARMING
To disarm, press remote control button two. The siren will chirp twice and the indicators will flash twice. The doors
will unlock if this system has been connected to the vehicles central locking system.
nd
If the alarm is sounding, the first press stops the siren, a 2 press then disarms the system.
VEHICLE 'LIGHTS ON' WARNING WHEN ARMING THE SYSTEM
If the vehicles lights are 'ON' when you arm the alarm, the siren will emit a warning sound before the arm chirp.
AUTOMATIC - LAST DOOR ARMING (PROGRAMMABLE)
The system can be programmed to arm automatically 20 seconds after closing the last door (or bonnet or boot).
Opening a door within 20 seconds will suspend the countdown and recommence on door closure.
DOORS, BONNET AND BOOT PROTECTION
The siren will sound and the indicators will flash for 30 seconds should any of these be opened when the system is
armed. The system requires your vehicle to be fitted with courtesy door light switches. Fitting door switches will
incur extra costs if not standard in your vehicle.
IMPACT SENSOR - 2 STAGE
The sensor is designed to detect major vehicle movement (sharp shock) such as impact, vehicle towing causing
shock, or violent glass breakage. It may also be triggered by shock waves produced from loud exhausts, thunder
and heavy vehicle traffic. It should not be triggered by normal wind or rocking motions. If the sensor receives a
light impact the siren fast chirps for a few seconds. It sounds fully for 20 seconds if it detects a heavy impact.
The sensitivity level is set by the installer and should be at its optimum. Over sensitivity can cause false alarms.
The shock sensor will not sound the siren if it has been bypassed by the remote.
SHOCK SENSOR BYPASS
The shock sensor can be bypassed to prevent false alarms. Arm the system and within 5 seconds press the same
button again.
5