6.8.1.2. Step-2
The user checks [FCPSR0]<PG1>=0. If protection status enabled then write "0" to [FCPMR0]<PM1> for
temporary release protection.
6.8.1.3. Step-3
The user transfers the reprogramming routine to the on-chip RAM, and moves the PC (Program Counter) to the
transferred program.
2018-06-05
Figure 6.31 Reprogram by User Boot Program (2)
Figure 6.32 Reprogram by User Boot Program (3)
112 / 120
TXZ Family
Flash Memory
Rev. 2.0