Resetting the application memory
Removing the cover
Regio Manual Maxi
Note! This procedure may only be carried out by qualified resellers and requires advanced
knowledge. The application program will be permanently lost after this procedure.
The processor's program memory (application program) is reset via the reset button in the
small hole on the right side of the unit. You can for example use a paper-clip to access the
reset button.
Figure 21. Resetting the program memory via the reset button
Note! This procedure requires knowledge of proper ESD protection; i.e. an earthed
wristband must be used.
Remove the cover according to figure 22, using a Torx 7.
Figure 22.
Chapter 18 Maintenance and service
77