Regio Midi; Application Examples - Regin REGIO MIDI Manual

Regio Midi

Communication
Control modes

Application examples

Regio Midi manual
The controllers can be connected to a central SCADA-system via RS485 (EXOline, BACnet*
or Modbus) and configured for a particular application using the configuration tool Regio
©
tool , which can be
www.regincontrols.com. See the manual for Regio tool
*
BACnet is only available in models with display
The controllers can be configured for different control modes/control sequences:
•
Heating
•
Heating or cooling via the change-over function
•
Heating/Heating
•
Heating/Cooling
•
Heating/ Cooling with VAV-control and forced supply air function
•
Heating/Cooling with VAV-control
•
Cooling
•
Cooling/Cooling
•
Heating/Cooling/VAV (only available in ...3-models, except C3DFOC)
•
Heating/Heating or Cooling via change-over (only available in ...F-models)
•
Change-over with VAV- function
downloaded free of
Chapter 2 Introduction to Regio
Regin's
charge from
©
for more information.
homepage
7