Installation; Safety Notices For Installation - Siemens SCALANCE XF-200BA Operating Instructions Manual

Simatic net industrial ethernet switches
Hide thumbs Also See for SCALANCE XF-200BA:
Table of Contents

Advertisement

Installation

4.1

Safety notices for installation

Safety notices
When installing the device, keep to the safety notices listed below.
If a device is operated in an ambient temperature of more than 50 °C, the temperature of the
device housing may be higher than 70 °C. The device must therefore be installed so that it
is only accessible to service personnel or users that are aware of the reason for restricted
access and the required safety measures at an ambient temperature higher than 50 °C.
If the device is installed in a cabinet, the inner temperature of the cabinet corresponds to the
ambient temperature of the device.
Safety notices on use in hazardous areas
General safety notices relating to protection against explosion
EXPLOSION HAZARD
Replacing components may impair suitability for Class 1, Division 2 or Zone 2.
The device is intended for indoor use only.
The device may only be operated in an environment with pollution degree 1 or 2 (see
IEC 60664-1).
Substitution of components may impair suitability of the equipment.
SCALANCE XF-200BA
Operating Instructions, 09/2018, C79000-G8976-C470-03
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
4
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents