Ecmsc/Wk Speed Controller; Installation & Operation - Price FFU series Installation And Service Manual

FAN FILTER UNIT
INSTALLATION & SERVICE INSTRUCTIONS
ECMSC/WK Speed Controller Installation and Operation
Sample line string below:
FFU-HE/24/48/RSR/BC/ECM/115/10//CT//HEPA//ECMSC// WK /DSW/PC/TMB/ATS/ML/FL/WPF/PL-AL/F-AL/PL-B12/F-B12
If unit does not have the wall kit (WK) option, proceed to STEP 11B.
Sample line string:
FFU-1-X//I/24/48/RSR/FC/ECM/115/10//CF//HEPA//ECMSC/////DSW-115////RMB/ASSP//////WPFH/PL-AL/F-AL//PL-B12/F-B12
STEP 8B: Locate pre-installed electrical box for wall-mounted speed controller.
STEP 9B: Wire speed controller according to wiring diagram found on page 58 - 60. Motor speed controller will have color coded
wires and must be wired to the matching colors on the wall-mounted portion.
NOTE: Wiring should be carried out by a certified electrician and meet national and local electrical codes.
STEP 10B: Attach the wall-mounted controls faceplate to the electrical box using the screws provided.
STEP 11B: Wire the unit according to appropriate wiring diagram. If Power Cord (PC) option is selected, simply insert plug end
into electrical socket.
Sample line string:
FFU-1-X//I/24/48/RSR/FC/ECM/115/10//CF//HEPA//ECMSC//WK-ECMSC//DSW-115//PC-115/RMB/ASSP//////WPFH/PL-AL/F-
AL//PL-B12/F-B12
NOTE: Wiring should be carried out by a certified electrician and meet national and local electrical codes.
STEP 12B: If using RSR filter, refer to page 11 for filter installation instructions.
NOTE: Ensure that the space is clean, free of debris, and that ducts are cleaned and ready for operation prior to installation of filter
STEP 13B: Ensure proper Voltage is hooked up to the unit.
STEP 14B: Proceed to controls and balancing section on pages 42.
FIGURE 4: ECMSC/WK
priceindustries.com | FAN FILTER UNIT - Manual
7