Price FFU-HE Series Manual
  1. Manuals
  2. Brands
  3. Price Manuals
  4. Water Filtration Systems
  5. FFU-HE Series
  6. Manual

Price FFU-HE Series Manual

Fan filter unit - high efficiency
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MANUAL – INSTALLATION & SERVICE
Fan Filter Unit - High Efficiency
FFU-HE Series
v200 – Issue Date: 02/19/16
© 2016 Price Industries Limited. All rights reserved.

Advertisement

Table of Contents
loading

Related Manuals for Price FFU-HE Series

Summary of Contents for Price FFU-HE Series

  • Page 1 MANUAL – INSTALLATION & SERVICE Fan Filter Unit - High Efficiency FFU-HE Series v200 – Issue Date: 02/19/16 © 2016 Price Industries Limited. All rights reserved.

  • Page 2: Table Of Contents

    FAN FILTER UNIT - HIGH EFFICIENCY TABLE OF CONTENTS Product overview Filter/Motor Indicator LED (FL/ML) - BTR ....27 Read & save these instructions ........1 Motor/Filter Indicator BAS (MBAS/FBAS ..... 31 Before you start ............2 Service: Cleaning of Pre-Filter ........32 introduction ..............

  • Page 3: Product Overview

    FAN FILTER UNIT - HIGH EFFICIENCY PRODUCT OVERVIEW Read and Save These Instructions Warning! To reduce the risk of fire, electrical shock, or injury to persons, observe the following: A. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.

  • Page 4: Before You Start

    The filters supplied by Price have been 100% tested and certified by the manufacturer to be free of defects and leaks. Price cannot accept responsibility for damage that occurs after shipment, whether through transit, handling or installation, and will not replace filters under our standard warranty.

  • Page 5: Introduction

    Introduction Price Fan Filter Units (FFU-HE) are ceiling module diffusers consisting of a fan/motor assembly and room-side (RSR), or bench- top (BTR) removable filters. The module is designed to provide unidirectional vertical airflow of filtered, clean air over a cleanroom space.

  • Page 6: Installation & Service Instructions

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Diffuser Module Installation The Price FFU-HE will come completely assembled from the factory with the exception of the HEPA/ULPA filters, will ship in its own carton, and the speed controller wall kits (if selected). NOTE: Do not open and/or install the HEPA/ULPA filters (RSR models only) prior to the full installation of the FFU-HE units.
  • Page 7 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS STEP 3: Raise the unit through ceiling grid at an angle until entire unit is above the ceiling grid STEP 4: Lower unit onto the backside of the tees. STEP 5: Secure the unit to the overhead structure using the eyebolts located on the back of the unit. Unit Eyebolts for Mounting STEP 6: Adjust and level the unit so that it rests on the tees and there is adequate compression on the gasket to warrant a tight seal.
  • Page 8 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS STEP 7: Refer to Factory Label to determine which speed controller is on the unit and use the following table for appropriate reference page for the particular speed controller on your unit. Sample line string for speed controller: FFU-HE/24/48/RSR/BC/ECM/115/10//CT//HEPA//ECMDX//WK/DSW/PC/TMB//ML/FL/ WPF/PL-AL///PL-MILL// Speed Controller...

  • Page 9: Speed Controllers

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Speed Controllers PSCSC/WK Speed Controller Installation and Operation Sample line string below: FFU-HE/24/48/RSR/BC/PSC/115/10//NP//HEPA//PSCSC//WK/DSW/PC/TMB/ATS/ML/FL/WPF/PL-AL/F-AL/PL-B12/F-B12 PSC Speed Controller with Wall Kit Option If unit does not have the wall kit (WK) option, proceed to step 13a. Sample line string below: FFU-HE/24/48/RSR/BC/PSC/115/10//NP//HEPA//PSCSC///DSW/PC/TMB/ATS/ML/FL/WPF/PL-AL/F-AL/PL-B12/F-B12 STEP 8A: Locate pre-installed electric box for wall-mounted speed controller.
  • Page 10 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Speed Controller Adjustment NOTE: If unit is ducted, refer to Technical Note: Balancing Ducted Units on page 44 of this manual. FAN FILTER UNIT - HIGH EFFICIENCY - Manual | priceindustries.com...

  • Page 11: Ecmsc/Wk Speed Controller Installation

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS ECMSC/WK Speed Controller Installation and Operation Sample line string below: FFU-HE/24/48/RSR/BC/ECM/115/10//CT//HEPA//ECMSC// WK /DSW/PC/TMB/ATS/ML/FL/WPF/PL-AL/F-AL/PL-B12/F-B12 If unit does not have the wall kit (WK) option, proceed to step 13b. Sample line string below: FFU-HE/24/48/RSR/BC/ECM/115/10//CT//HEPA//ECMSC// /DSW/PC/TMB/ATS/ML/FL/WPF/PL-AL/F-AL/PL-B12/F-B12 ECMSC/WK STEP 8B: Locate pre-installed electrical box for wall-mounted speed controller.
  • Page 12 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS POTENTIOMETER (POT) MEASURE (+) VDC MEASURE (-) VDC ECMSC Speed Controller STEP 13B: Determine test point voltage (VDC) from the formula based on the desired airflow using the appropriate chart below. BTR Filters with FC Wheel RSR Filters with FC Wheel 24"x24"...
  • Page 13 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Example: 24”x48”, FC Wheel, 115V @ 450cfm VDC = (CFM + 201)/250 VDC = (450+201)/250 VDC = 2.60V The potentiometer (POT/DIAL) would need to be turned up until the voltage measured 2.60 at the Measurement Tabs NOTE: The calculated VDC value is intended as a starting point;...
  • Page 14 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS POTENTIOMETER/ DIAL ADJUST GREEN STATUS LED MUST BE BLINKING. (CODE 1 THRU 4) Speed Controller Adjustment STEP 15B: Wait a few seconds for the ECM motor to adjust its speed and then verify fan airflow with measurements at the unit face using a flow hood.

  • Page 15: Ecmdx/Wk Speed Controller Installation

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS ECMDX/WK Speed Controller Installation and Operation Sample line string below: FFU-HE/24/48/RSR/BC/ECM/115/10//CT//HEPA//ECMDX// WK /DSW/PC/TMB/ATS/ML/FL/WPF/PL-AL/F-AL/PL-B12/F-B12 ECMDX Wall Kit Speed Controller If unit does not have the wall kit (WK) option, proceed to step 11c. NOTE: Sample line string below: 1//FFU-HE/24/48/RSR/BC/ECM/115/10//CT//HEPA//ECMDX// /DSW/PC/TMB/ATS/ML/FL/WPF/PL-AL/F-AL/PL-B12/F-B12...
  • Page 16 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS STEP 10C: Attach the wall-mounted controls faceplate to the electrical box using the screws provided. STEP 11C: Wire the unit according to appropriate wiring diagram. Refer to table below for reference page number. If Power Cord (PC) option is selected, simply insert plug end into electrical socket.
  • Page 17 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS BTR Filters with FC Wheel RSR Filters with FC Wheel 24"x24" FFU-HE 24"x24" FFU-HE Voltage Equation Voltage Equation L. Set = (CFM/5.90) L. Set =(CFM/3.52) + 1 L. Set = (CFM/5.58) L.

  • Page 18: Bacnet Flow Controller (Bfc) Installation

    Refer to page 10 for the ECM Speed Controller instructions for calculating VDC. • BACnet: Log into Building Management System, or Price supplied BFC-FE front end. Calculate Local Setpoint value using the equations on page 15 from the ECMDX instructions. Write this value into ECM Setpoint BACnet point.
  • Page 19 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Price FFU-HE-FE Points List STEP 15D: Check airflow using flow hood and adjust ECM Setpoint as required until desired airflow is reached. NOTE: Before proceeding to next step, ensure unit is operating at desired airflow. Any changes to the airflow will require the filter status to be reset.
  • Page 20 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Filter Reset Screen NOTE: Make sure the area directly beneath and around the unit is clear of any personnel or equipment as this can affect the reading of the clean filter static pressure. STEP 18D: Press the ‘Enter/Menu’...

  • Page 21: Optional Accessories - Ats

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Optional Accessories Sample line string below: FFU-HE/24/48/RSR/BC/ECM/115/10//CT//HEPA//ECMDX//WK/DSW/PC/TMB/ATS/ML/FL/WPF/PL-AL/F-AL/PL-B12/F-B12 STEP 1: If unit has room side removable filter (RSR), remove diffusers perforated face by turning quarter turn fasteners holding face in place. FFU-HE/24/48/RSR/BC/ECM/115/10//CT//HEPA//ECMDX//WK/DSW/PC/TMB/ATS/ML/FL/WPF/PL-AL/F-AL/PL-B12/F-B12 NOTE: Safety cables will be attached to the diffuser face, but care should be taken to ensure that diffuser face does not swing and...
  • Page 22 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS STEP 3: Insert aerosol test fitting or adaptor (the aerosol injection port has a 3/8” NPT internal thread) into ATS test port. NOTE: An adaptor/test fitting that is longer than 1.5” and/or wider than 1” will not fit. STEP 4: Inject aerosol test agent and measure particulate counts according to local codes.

  • Page 23: Unit Filter Installation

    The filters supplied by Price have been 100% tested and certified by the manufacturer to be free of defects and leaks. Price cannot accept responsibility for damage that occurs after shipment, whether through transit, handling or installation, and will not replace filters under our standard warranty.
  • Page 24 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS STEP 5 Loosen cam locks on diffuser to prepare filter for installation. Be sure latches are turned inwards so as not to interfere with filter frame. NOTE: Note location of filter alignment guides (minimum one per side, dependent on size). STEP 6 STEP 7 Raise the filter in place using two people and being careful not...

  • Page 25: Bench Top Replaceable Filter

    Damage to filters can occur during installation or during leak qualification testing. The filters supplied by Price have been 100% tested and certified by the manufacturer to be free of defects and leaks. Price cannot accept responsibility for damage that occurs after shipment, whether through transit, handling or installation, and will not replace filters under our standard warranty.
  • Page 26 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS STEP 5 STEP 6 Place FFU-HE top cap assembly onto filter’s gasketed flange/ Attach filter to top cap assembly by hooking and securing frame, being careful to not damage the filter media. latches.

  • Page 27: Filter/Motor Indicator Led (Ml/Fl) - Rsr

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Filter/Motor Indicator LED (ML/FL) – RSR Sample line string below: FFU-HE/24/48/RSR/BC/ECM/115/10//CT//HEPA//ECMDX//WK/DSW/PC/TMB/ATS/ML/FL/WPF/PL-AL/F-AL/PL-B12/F-B12 LED Operation Option Code Action Notes Color Indicates normal operation until filter pressure drop exceeds calibrat- Green None ed pressure drop (factory set at 1.5x clean filter pressure). Filter LED Indicates filter pressure drop has exceeded calbirated setting (factory Yellow...
  • Page 28 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Table 3. Set Point Adjustment STEP 2: Calculate number of turns required based on difference between factory set point and desired set point using the following chart. 1.00 1.00 0.90 0.90 0.80 0.80...

  • Page 29: Filter/Motor Indicator Led (Fl/Ml) - Btr

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Filter/Motor Indicator LED (FL/ML) – BTR Sample line string below: FFU-HE/24/48/BTR/BC/ECM/115/10//CT//HEPA//ECMDX//WK/DSW/PC/TMB///ML/FL/WPF/PL-AL///PL-MILL// LED Operation Option Code Action Notes Color Indicates normal operation until filter pressure drop exceeds calibrat- Green None ed pressure drop (factory set at 1.5x clean filter pressure). Filter LED Indicates filter pressure drop has exceeded calbirated setting (factory Yellow...
  • Page 30 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS STEP 3: Remove well nut in center port of BTR filter. Remove Well Nut on Static Presure Port STEP 4: Remove threaded standoff and lock washer from LED cable assembly RUBBER WASHER THREADED STANDOFF LOCK WASHER...
  • Page 31 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS STEP 5: Thread cable through static pressure port on face of BTR filter NOTE: It is recommended to rest the filter frame on 2x4 lumber to protect the LED light from breaking Filter Resting on Lumber STEP 6: Put lock washer and threaded standoff back on cable and tighten to LED.
  • Page 32 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS STEP 7: With two (2) people holding the unit, pull cable back through plenum until plenum can rest on top of filter. Cable Assembly STEP 8: Refer to BTR Filter Instructions found on page 23 for proper filter installation. STEP 9: Refer to wiring diagram (located in control box) to connect LED leads to terminal block.

  • Page 33: Motor/Filter Indicator Bas

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Motor/Filter Indicator BAS (MBAS/FBAS) Sample line string below: FFU-HE/24/48/RSR/BC/ECM/115/10//CT//HEPA//ECMDX//WK/DSW/PC/TMB/ATS/MBAS/FBAS/WPF/PL-AL/F-AL/PL-B12/ F-B12 Operation Option Code Action Notes Troubleshoot Closes a dry contact to let the BAS signal pass through when the static Motor BAS MBAS pressure is less than 0.2"...

  • Page 34: Service: Cleaning Of Pre-Filter

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Service: Cleaning of Pre-filter NOTE: Disconnect the unit from the electrical power source before attempting any service. Electrical service should be performed by a licensed electrician or authorized service technician. NOTE: When performing any type of maintenance on the FFU be careful to reduce as much as possible the potential for introducing the internals of the unit to dirt, dust, and debris that may be present in the unit’s external environment.

  • Page 35: Service: Removal And Replacement Of Rsr Filter

    INSTALLATION & SERVICE INSTRUCTIONS Service: Removal and Replacement of RSR Filters Replacement filters can be ordered through your local Sales Representative. Visit the Price Ind. Website to find yours (http://www. priceindustries.com/contact/reps-dealers). STEP 1: Remove diffuser perforated face by turning quarter turn fasteners holding face in place.

  • Page 36: Service: Removal And Replacement Of Btr Filters

    INSTALLATION & SERVICE INSTRUCTIONS Service: Removal and Replacement of BTR Filters Replacement filters can be ordered through your local Sales Representative. Visit the Price Ind. Website to find yours (http://www. priceindustries.com/contact/reps-dealers). STEP 1: Remove unit from ceiling, gently placing FFU-HE on a clean, dry surface.

  • Page 37: Service: Changing Motors In The Field

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Service: Changing Motors in the Field Top Access Motor/Blower Assembly Sample line string below: FFU-HE/24/48/RSR/BC/ECM/115/10//CT//HEPA//ECMDX//WK/DSW/PC/TMB/ATS/MBAS/FBAS/WPF/PL-AL/F-AL/PL-B12/ F-B12 NOTE: Disconnect the unit from the electrical power source before attempting any service. Electrical service should be performed by a licensed electrician or authorized service technician.
  • Page 38 STEP 8: Replace with the new motor/blower assembly and reassemble by reversing the above steps. NOTE: For information on how to order replacement motor/blowers, contact your local Price Sales Representative. Visit Price’s website (http://www.priceindustries.com/contact/reps-dealers) to locate your local Representative. STEP 9: Double check airflow to ensure that set point hasn’t changed. applicable speed controller found on pages X-X...

  • Page 39: Room Side Accessible Motor/Blower Assembly

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Room Side Accessible Motor/Blower Assembly NOTE: Sample line string below: 1//FFU-HE/24/48/RSR/BC/ECM/115/10//CT//HEPA//ECMDX//WK/DSW/PC/RMB/ATS/MBAS/FBAS/WPF/PL-AL/F-AL/PL-B12/ F-B12 NOTE: Disconnect the unit from the electrical power source before attempting any service. Electrical service should be performed by a licensed electrician or authorized service technician.
  • Page 40 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS STEP 3: Turn all cam latch filter retainers to the open position STEP 4: Remove filter by handling frame; do not touch filter media. Extreme caution should be taken when removing the filter if the filter is to be reinstalled. Touch the filter by the frame only; NOTE: never touch the filter media as it can damage the filter.
  • Page 41 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS STEP 6: Remove the housing exposing the motor/blower assembly. Removal of 2x2 Motor/Blower Housing STEP 7: Remove 7/16” nuts holding motor/blower assembly in place. Removal of Motor/Blower Housing STEP 8: Drop motor/blower assembly out of unit. Be careful as wire connection are still in place. STEP 9: Disconnect plug and play connection connecting wires from motor to control box.
  • Page 42 STEP 13: Double check airflow to ensure that set point hasn’t changed. applicable speed controller found on pages X-X NOTE: For information on how to order replacement motor/blowers, contact your local Price Sales Representative. Visit Price’s website (http://www.priceindustries.com/contact/reps-dealers) to locate your local Representative.

  • Page 43: Technical Note: Static Pressure Ports

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Technical Note: Static Pressure Ports Room Side Replaceable (RSR) Port Sample line string below: FFU-HE/24/48/RSR/BC/ECM/115/10//CT//HEPA//ECMDX//WK/DSW/PC/TMB/ATS/ML/FL/WPF/PL-AL/F-AL/PL-B12/F-B12 STEP 1: Remove diffuser perforated face by turning quarter turn fasteners holding face in place. Remove Diffuser Face with Quarter Turn Fasteners NOTE: Safety cables will be attached to the diffuser face, but care should be taken to ensure that diffuser face does not swing and...

  • Page 44: Bench Top Replaceable (Btr) Port

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Bench Top Replaceable (BTR) Port NOTE: Sample line string below: 1//FFU-HE/24/48/BTR/BC/ECM/115/10//CT//HEPA//ECMDX//WK/DSW/PC/TMB///ML/FL/WPF/PL-AL///PL-MILL// NOTE: Safety cables will be attached to the diffuser face, but care should be taken to ensure that diffuser face does not swing and injure anyone.

  • Page 45: Technical Note: Design With Vav/Constant Flow Boxes

    FFU-HE should be as close to 0.0” w.g. as possible. For any additional information, or troubleshooting assistance on systems and design with fan filter units used in sequence with a variable upstream air source, contact Price Industries Fan Filter help at criticalenvironments@priceindustries.com, or dial (204) 654- 5613 option 5.

  • Page 46: Technical Note: Balancing Ducted Units

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Technical Note: Balancing Ducted Units STEP 1: Set FFU on benchtop and balance to desired flow using appropriate speed controller set up (Pages X-X). STEP 2: Confirm airflow using flow hood and adjust speed controller as required. STEP 3: Lock primary air control STEP 4: Install FFU into ceiling grid STEP 5: Turn FFU’s on –...

  • Page 47: Troubleshooting Tips

    If the inlet static is positive, reduce your airflow device airflow 25% more. Return to Step 4, above and finish balancing unit. If experiencing further issues with unit, contact Price Industries Fan Filter help at: By Email: criticalenvironments@priceindustries.com By Phone: (204) 654-5613 option 5 Check prefilter media (only with optional prefilter);...

  • Page 48: Btr

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS HEPA Size Quantity Description Price Part Number Filter, HEPA, 99.99% FFU-HE 24 x 24 x 3.06" 042299-011 Filter, HEPA, 99.99% FFU-HE 24 x 36 x 3.06" 042299-012 Filter, HEPA, 99.99% FFU-HE 24x 48 x 3.06"...

  • Page 49: Rsr

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS HEPA Size Quantity Description Price Part Number Filter, HEPA, 99.99% FFU-HE 24 x 24 x 3.5" 042299-005 Filter, HEPA, 99.99% FFU-HE 24 x 36 x 3.5" 042299-006 Filter, HEPA, 99.99% FFU-HE 24 x 48 x 3.5"...
  • Page 50 INSTALLATION & SERVICE INSTRUCTIONS Reference Manuals BACnet Wiring Guidelines Deluxe ECM Speed Controller ECM Motor Troubleshooting Manual BFC Speed Controller NOTE: Above manuals can be found on the Price Industries website at priceindustries.com. FAN FILTER UNIT - HIGH EFFICIENCY - Manual | priceindustries.com...

  • Page 51: Ffu-He Ordering Procedure

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS FFU-HE Ordering Procedure 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 // 12 // 14 // 16 // 18 // 20 // 22 // 24 // 26 // 28 / 29 // 31 / 32 / 33 // 35 / 36 Type (2) Speed Control (16) Prefilter (31)
  • Page 52 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS WIRING DIAGRAM - FFU-HE LED - FL WIRING DIAGRAM - FFU-HE LED - ML FAN FILTER UNIT - HIGH EFFICIENCY - Manual | priceindustries.com...
  • Page 53 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS WIRING DIAGRAM - FFU-HE LED - FBAS WIRING DIAGRAM - FFU-HE LED - MBAS priceindustries.com | FAN FILTER UNIT - HIGH EFFICIENCY - Manual...
  • Page 54 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS WIRING DIAGRAM - FFU-HE LED - ML/FL WIRING DIAGRAM - FFU-HE LED - FL + FBAS FAN FILTER UNIT - HIGH EFFICIENCY - Manual | priceindustries.com...
  • Page 55 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS WIRING DIAGRAM - FFU-HE LED - MBAS/FL WIRING DIAGRAM - FFU-HE LED - FL/FBAS priceindustries.com | FAN FILTER UNIT - HIGH EFFICIENCY - Manual...
  • Page 56 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS WIRING DIAGRAM - FFU-HE LED - ML + MBAS WIRING DIAGRAM - FFU-HE LED - MBAS + FBAS FAN FILTER UNIT - HIGH EFFICIENCY - Manual | priceindustries.com...
  • Page 57 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS WIRING DIAGRAM - FFU-HE LED - ML/FL + FBAS WIRING DIAGRAM - FFU-HE LED - ML + MBAS/FL priceindustries.com | FAN FILTER UNIT - HIGH EFFICIENCY - Manual...
  • Page 58 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS WIRING DIAGRAM - FFU-HE LED - ML MBAS/FL + FBAS WIRING DIAGRAM - FFU-HE LED - ML + MBAC/FL + FBAC FAN FILTER UNIT - HIGH EFFICIENCY - Manual | priceindustries.com...
  • Page 59 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS WIRING DIAGRAM - FFU - 115/277V, 1ø PSC/STANDARD MOTOR WIRING DIAGRAM - FFU - 208/240V, 1ø MOTOR/STANDARD/PSC priceindustries.com | FAN FILTER UNIT - HIGH EFFICIENCY - Manual...
  • Page 60 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS WIRING DIAGRAM - FFU-HE - 115/277V 1ø ECM MOTOR STANDARD ECM SPEED CONTROL ECMSC WIRING DIAGRAM - FFU-HE - 115/277V 1ø ECM MOTOR DELUXE ECM SPEED CONTROL ECMDX FAN FILTER UNIT - HIGH EFFICIENCY - Manual | priceindustries.com...
  • Page 61 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS WIRING DIAGRAM - FFU-HE - 115/277V 1ø ECM MOTOR BACNET FLOW CONTROL BFC WIRING DIAGRAM - FFU-HE - 240VV 1ø ECM MOTOR STANDARD ECM SPEED CONTROL ECMSC priceindustries.com | FAN FILTER UNIT - HIGH EFFICIENCY - Manual...
  • Page 62 FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS WIRING DIAGRAM - FFU-HE - 240VV 1ø ECM MOTOR DELUXE ECM SPEED CONTROLLER ECMDX WIRING DIAGRAM - FFU-HE - 240VV 1ø ECM MOTOR BACNET FLOW CONRTOLLER BFC FAN FILTER UNIT - HIGH EFFICIENCY - Manual | priceindustries.com...

  • Page 63: Warranty

    FAN FILTER UNIT - HIGH EFFICIENCY INSTALLATION & SERVICE INSTRUCTIONS Warranty The Company warrants and guarantees that all goods within this catalog that have been manufactured by the Company have been manufactured in accordance with the specifications published herein and will be free from defects in material and workmanship for a period of twelve (12) months from the date of Bill of Lading issued by the Company.
  • Page 64 This document contains the most current product information as of this printing. For the most up-to-date product information, please go to priceindustries.com © 2016 Price Industries Limited. All rights reserved.

Table of Contents