2.5.3. Btr Filter Removal And Replacement - Price FFU series Installation And Service Manual

FAN FILTER UNIT
INSTALLATION & SERVICE INSTRUCTIONS

2.5.3. BTR Filter Removal and Replacement

Replacement filters can be ordered through your local Sales Representative. Visit Price Industries website to locate your local
representative (http://www.priceindustries.com/contact/reps-dealers).
STEP 1: Remove unit from ceiling, gently placing FFU on a clean, dry surface.
NOTE: If the FL or ML filter option has been selected, it is recommended to rest the filter frame on 2x4 lumber to protect the LED
light.
STEP 2: Unhook latches attaching bench top replaceable filter to fan filter body.
FIGURE 23: FILTER LATCHES.
STEP 3: Remove filter by handling frame; do not touch filter media if re-using filter.
Extreme caution should be taken when removing the filter if the filter is to be reinstalled. Touch the filter by the frame only;
NOTE:
never touch the filter media as it can damage the filter.
STEP 4: For installation of new filter, follow steps on page 13.
25
priceindustries.com | FAN FILTER UNIT - Manual