Price FFU series Installation And Service Manual page 22

FAN FILTER UNIT
INSTALLATION & SERVICE INSTRUCTIONS
STEP 4: Remove threaded standoff and lock washer from LED
cable assembly.
THREADED STANDOFF
LOCK WASHER
FIGURE 13: LED THREADED STANDOFF.
STEP 6: Put lock washer and threaded standoff back on cable and tighten to LED.
20
FAN FILTER UNIT - Manual | priceindustries.com
RUBBER WASHER
METAL WASHER
LED
FIGURE 15: BTR FACE INSTALLED LED.
STEP 5: Thread cable through static pressure port on face of
BTR filter.
NOTE: It is recommended to rest the filter frame on 2x4 lumber
to protect the LED light from breaking.
FIGURE 14: FILTER POSITION FOR LED INSTALLATION.