Table of Contents
Advertisement
Quick Links
TMG Corporate Website
Disclaimer:
All trademarks appearing within this PDF are trademarks of their respective owners.
Form 080/01
Complimentary Reference Material
This PDF has been made available as a complimentary service for you to assist in
evaluating this model for your testing requirements.
TMG offers a wide range of test equipment solutions, from renting short to long
term, buying refurbished and purchasing new. Financing options, such as
Financial Rental, and Leasing are also available on application.
TMG will assist if you are unsure whether this model will suit your requirements.
Call TMG if you need to organise repair and/or calibrate your unit.
If you click on the "Click-to-Call" logo below, you can all us for FREE!
TMG Products Website
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Tektronix TLA5000 Series
Summary of Contents for Tektronix TLA5000 Series
- Page 1 Complimentary Reference Material This PDF has been made available as a complimentary service for you to assist in evaluating this model for your testing requirements. TMG offers a wide range of test equipment solutions, from renting short to long term, buying refurbished and purchasing new. Financing options, such as Financial Rental, and Leasing are also available on application.
- Page 2 TLA5000 Series Logic Analyzer Installation Manual This document supports TLA System Software Version 5.00 and above. Warning The servicing instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless you are qualified to do so. Refer to all safety summaries prior to performing service.
- Page 3 Copyright © Tektronix, Inc. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by national copyright laws and international treaty provisions. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material.
- Page 4 Tektronix, with shipping charges prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Tektronix service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations.
- Page 5 In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of the warranty period. If Tektronix is unable to provide a replacement that is free from defects in materials and workmanship within a reasonable time thereafter, Customer may terminate the license for this software product and return this software product and any associated materials for credit or refund.
-
Page 6: Table Of Contents
Appendix A: User Service Procedures ................General Care ....................Self Calibration ....................Preventive Maintenance..................In Case of Problems ..................Repacking for Shipment ..................Appendix B: Accessories and Options ................Standard Accessories ..................Optional Accessories ..................Options......................Index TLA5000 Series Logic Analyzer Installation Manual... - Page 7 Table of Contents List of Figures Figure i: TLA5000 series logic analyzer............... Figure 1: Location of the ground connection..............Figure 2: Accessory connections ................. Figure 3: Connecting the P64xx logic analyzer probes ............Figure 4: Power cord connector location ................
-
Page 8: General Safety Summary
Avoid Exposed Circuitry. Do not touch exposed connections and components when power is present. Use Proper Fuse. Use only the fuse type and rating specified for this product. TLA5000 Series Logic Analyzer Installation Manual... - Page 9 DANGER indicates an injury hazard immediately accessible as you read the marking. WARNING indicates an injury hazard not immediately accessible as you read the marking. CAUTION indicates a hazard to property including the product. The following symbols may appear on the product: TLA5000 Series Logic Analyzer Installation Manual...
-
Page 10: Service Safety Summary
Use Care When Servicing With Power On. Dangerous voltages or currents may exist in this product. Disconnect power, remove battery (if applicable), and disconnect test leads before removing protective panels, soldering, or replacing components. To avoid electric shock, do not touch exposed connections. TLA5000 Series Logic Analyzer Installation Manual... -
Page 11: Environmental Considerations
Union’s requirements according to Directive 2002/96/EC on waste electrical and electronic equipment (WEEE). For information about recycling options, check the Support/Service section of the Tektronix Web site (www.tektronix.com). Mercury Notification. This product uses an LCD backlight lamp that contains mercury. Disposal may be regulated due to environmental considerations. -
Page 12: Preface
Be sure to follow all warnings, cautions, and notes in this manual. TLA5000 Series Logic Analyzers The TLA5000 series logic analyzers consist of four portable logic analyzer mainframes, which differ by channel width, and all of the accessories and supports that used with them. -
Page 13: Table I: Related Documentation
Complete list of TLA product specifications TPI.NET Documentation Detailed information for controlling the logic analyzer using .NET Field upgrade kits Upgrade information for logic analyzer products Optional Service Manuals Self-service documentation for modules and mainframes viii TLA5000 Series Logic Analyzer Installation Manual... -
Page 14: Basic Installation
Basic Installation This chapter describes all of the steps needed to install your Tektronix logic analyzer and its related accessories. Check the Shipping List Check that you have received all of the parts of your logic analyzer using the shipping list. Also check the following: That you have the correct power cords for your geographical area. -
Page 15: Connecting Accessories
After installing the mainframe, you can connect accessories such as an external monitor, keyboard, and printer. Connect the accessories to the side of the instrument; depending on your model, the number of connectors and locations may differ. (See Figure 2.) TLA5000 Series Logic Analyzer Installation Manual... -
Page 16: Figure 2: Accessory Connections
Basic Installation Figure 2: Accessory connections Additional information on accessories is provided. (See Table 1.) TLA5000 Series Logic Analyzer Installation Manual... -
Page 17: Connecting Probes
4 in-lbs (max). Undertightening the probe screws can result in intermittent performance. Over tightening can result in stripped screws. Connect the logic analyzer probes and the optional retaining brackets as shown. (See Figure 3.) TLA5000 Series Logic Analyzer Installation Manual... -
Page 18: First Time Operation
Figure 3: Connecting the P64xx logic analyzer probes First Time Operation CAUTION. Connect the keyboard, mouse, and other accessories before applying power to the logic analyzer. Connecting the accessories after turning on the logic analyzer can damage the accessories. TLA5000 Series Logic Analyzer Installation Manual... -
Page 19: Figure 4: Power Cord Connector Location
3. Turn on the logic analyzer as follows: a. Press the On/Standby switch on the front of the instrument to turn on the logic analyzer. (See Figure 4.) b. Wait for the logic analyzer to complete power-on self-tests and start Windows. TLA5000 Series Logic Analyzer Installation Manual... -
Page 20: Performing The Incoming Inspection
The logic analyzer connects to the target system through probes. The logic analyzer probes allow you to connect to the target system in several different ways. For probe-specific connection details, refer to the appropriate probe instruction manual or browse the Tektronix Web site. TLA5000 Series Logic Analyzer Installation Manual... -
Page 21: Additional Information
Basic Installation Additional Information Product Overview provides a quick overview of your Tektronix logic analyzer. (See page 9.) For detailed information on using the logic analyzer refer to the TLA online help. Release Notes. To access the Logic Analyzer Release Notes, click Start →... -
Page 22: Product Overview
(See Figure 2 on page 3.) Use the four front panel BNC connectors to send signals between the logic analyzer and other instruments. For example, use the iView cable to connect the logic analyzer to an oscilloscope. TLA5000 Series Logic Analyzer Installation Manual... - Page 23 Product Overview TLA5000 Series Logic Analyzer Installation Manual...
-
Page 24: Restoring And Installing Software
7. Press the F10 function key to exit and save the BIOS setup. Reinstalling the Hard Disk Image The Tektronix Logic Analyzer comes with CDs containing the Microsoft Windows operating system and the latest application software. All software required to run... -
Page 25: Table 2: Tla User File Suffixes
If you don’t have a copy of the microprocessor support software, contract your Tektronix Account Manager to order a replacement copy. If you cannot contact the account manager, contact the Tektronix Support Center (refer to Contacting Tektronix at the beginning of this document). NOTE. -
Page 26: Table 3: Bios Boot Settings For Reinstalling Software From The Cd-Rom
5. Reinstall any user files that you backed up previously. Reinstall any software (such as the microprocessor support software) to use on the logic analyzer. 6. If desired, reconfigure the TLA network interface. TLA5000 Series Logic Analyzer Installation Manual... -
Page 27: Installing The Tla Application Software
To use all of the features of the TLA application software on your PC, you must install additional third-party software. The following third-party software is available on the TLA Application Software CD V5.0, or higher: TLA5000 Series Logic Analyzer Installation Manual... - Page 28 The TLA Offline software allows you to run the TLA application without connecting to an instrument. You can analyze previously acquired data from a logic analyzer, create or modify reference memories, or perform system tests without being connected to an instrument. TLA5000 Series Logic Analyzer Installation Manual...
-
Page 29: Upgrading Or Restoring Firmware
1. Exit the logic analyzer application. 2. Click Start → Programs → Tektronix Logic Analyzer → TLA Firmware Loader. If the TLA Connection dialog box displays, select an instrument, and click the Connect button. -
Page 30: Appendix A: User Service Procedures
Appendix A: User Service Procedures This appendix describes high-level service information and procedures for the Tektronix logic analyzers. Additional troubleshooting procedures are located in the service manual. General Care Protect the instrument from adverse weather conditions. The instrument is not waterproof. - Page 31 The floppy disk drive requires routine maintenance to operate at maximum efficiency. The disks can be damaged if dirt and dust accumulate on the recording surfaces. To prevent damage, store the disks in their protective containers where TLA5000 Series Logic Analyzer Installation Manual...
-
Page 32: In Case Of Problems
Other Diagnostic Software. Other diagnostic software may be installed on your instrument and accessible from the Windows Start menu. This diagnostic software may vary depending on your instrument. Use the online help that comes with TLA5000 Series Logic Analyzer Installation Manual... - Page 33 Complete the following steps to start the TLA server: 1. On the logic analyzer, click Start → Programs → Tektronix Logic Analyzer → TLA Server. An icon with a red circle appears in the toolbar.
-
Page 34: Table 4: Failure Symptoms And Possible Causes
On/Standby switch. Check that fans start and that front-panel indicators light. Check that power is available at the power source. Instrument failure: contact your local Tektronix service center. External monitor does not turn on. Check the monitor power cord connection. -
Page 35: Repacking For Shipment
Repacking for Shipment If a mainframe or module is to be shipped to a Tektronix service center for repair, attach a tag to the mainframe or module showing the owner’s name and address, the serial number, and a description of the problem(s) encountered and/or service required. -
Page 36: Appendix B: Accessories And Options
P6419 020-2199-xx 34-channel probe interface kit -barrel connectors 34-channel probe interface kit -mini PV connectors 020-3000-xx 1-channel reduced bias voltage leadset 196-3478-xx 8-channel reduced bias voltage leadset 196-3477-xx 34-channel high density mictor probe P6434 TLA5000 Series Logic Analyzer Installation Manual... -
Page 37: Options
Increase acquisition record length to 2 M @ 235 MHz — Increase acquisition record length to 8 M @ 235 MHz English Manuals TLA5000 Installation Manual 071-1301-xx Tektronix Logic Analyzer Quick Start User Manual 071-1575-xx TLA5000 Logic Analyzer Quick Reference 071-1343-xx Installation Card Tektronix Logic Analyzer Documentation CD... -
Page 38: Index
BIOS configuration, 11 Service, user, Firmware, common problem preventive maintenance, 17 upgrading, 16 checklist, 21 Shipping list, Front panel controls, 9 installing software, 11 checking, 1 Shipping, 22 General maintenance, 17 Network connection problems, 20 TLA5000 Series Logic Analyzer Installation Manual... - Page 39 TLA Offline, 15 installing:TPI software, 14 TLA Online, 15 other diagnostics, 19 TLA Server, 20 power on diagnostics, 19 Troubleshooting, 19 problems, 20 common problem third-party, 14 checklist, 21 TLA Mainframe network problems, 20 diagnostics, 19 TLA5000 Series Logic Analyzer Installation Manual...
Need help?
Do you have a question about the TLA5000 Series and is the answer not in the manual?
Questions and answers