Clear and Sanitize Procedures..................Memory Devices....................Data Export Devices................... Built-In Security Features ..................Troubleshooting..................... How to Clear or Sanitize a Non-Functional Instrument ........... How to Recover from Clearing or Removing the Instrument’s Memory ........ TLA5000B Series Logic Analyzer Declassification and Security...
Page 4
Table of Contents TLA5000B Series Logic Analyzer Declassification and Security...
Products The following Tektronix products are covered by this document: All TLA5000B Series Logic Analyzers Related Documents TLA5000 Series Tektronix Logic Analyzer Service Manual, Tektronix part number 071-1305-00. Terms The following terms may be used in this document: Clear. This removes data on media/memory before reusing it in a secured area.
Page 6
Preface TLA5000B Series Logic Analyzer Declassification and Security...
Using the BIOS disables the devices for DOS programs, while the Drive, and CD-RW Windows Device Manager disables the devices for Windows programs. These Capability procedures disable both USB and the CD-RW to prevent their use. TLA5000B Series Logic Analyzer Declassification and Security...
Page 9
15. Right-click TEAC FD-05PUW USB Device, and select Disable. 16. Reboot the instrument to make the changes effective. 17. Password-protect the Windows Administrator account and set up Guest accounts for end users so that these changes cannot be easily reversed. TLA5000B Series Logic Analyzer Declassification and Security...
Page 10
6. Expand the device category Network Adapters. 7. Double click on the Intel® PRO/100 VE Network Connection. 8. Click the General tab, and select Do not use this device (disable) in the Device Usage drop-down list. TLA5000B Series Logic Analyzer Declassification and Security...
To secure the instrument setups or waveform data, you must remove the hard disk drive and store it in a safe place. Additional removable hard drives (Tektronix part number 065-0753-00) can be purchased from Tektronix. If the hard drive has been removed and a new hard drive is installed, you need to install the operating system and instrument application software.
After removal of a board, refer to your company’s internal policies regarding handling or disposal of the board. Internal Hard Disk Drive Remove the Internal Hard Disk Drive and return the product to Tektronix. A new drive will be installed, and the instrument will be repaired and adjusted as necessary.
Need help?
Do you have a question about the TLA5000B Series and is the answer not in the manual?
Questions and answers