19
Language
20
Set Time & Date
21
Event Log Channel I Indicates injection history.
22
Event Log Channel II Indicates injection history.
Restart Pump
23
NOTE:
While the pump is in programmable mode, all parameters can be set, or parameters
used in last program can be confirmed. The memory hold capability is available for the life of
the internal battery.
5 – Alarm State and Troubleshooting
Alarm State
When the infusion pump detects a problem, the following occurs:
The infusion stops.
An audible alarm sounds.
A message appears on the display screen indicating the cause of the alarm, and:
The LED indicator will change from green to red.
NOTE:
Pressing
Enable changing the language of pump messages (only for
models, in which the softwae includes more than one language).
Set actual time and date.
Reboots the Pump and returns to openning screen.
during an alarm, mutes the alarm for two minutes.
71