Inspect The Engine Air Filter; Inspect The Tires, Wheels And Lug Nut Torque - Genie GTH-1048 Service Manual

Serial number range from gth1007a-11443 to gth1009a-14000/from gth1007b-7101 to gth1007b-7251
Hide thumbs Also See for GTH-1048:
Table of Contents

Advertisement

Service Manual
Checklist B Procedures
B-4 Ins pect the Engi ne Air Filter
B-4

Inspect the Engine Air Filter

Genie requires that this procedure be performed
every 250 hours or quarterly, whichever comes
first.
Perform this procedure more often if dusty
conditions exist.
Maintaining the engine air filter in good condition is
essential to good engine performance and service
life. Failure to perform this procedure can lead to
poor engine performance and component damage.
Note: Perform this procedure with the engine off.
1
Release the latches on the front cover of the
air cleaner assembly. Remove the cover.
2
Gently twist and pull out the external or
primary filter element.
3
Remove the inner or secondary filter element.
4
Clean the inside of the canister and the
gasket with a damp cloth.
5
Inspect the primary and secondary air filter
elements. If needed, blow from the inside out
using low pressure dry compressed air, or
carefully tap out dust.
6
Install the secondary filter element first, then
install the primary filter element.
7
Install the front cover onto the air cleaner
assembly and secure the latches.
28
B-5 Ins pect the Tir es, Wheels and Lug N ut T orque
B-5
Inspect the Tires, Wheels and
Lug Nut Torque
Genie specifications require that this procedure be
performed every 250 hours or quarterly, whichever
comes first.
Maintaining the tires and wheels, including proper
wheel fastener torque, is essential to safe
operation and good performance. Tire and/or
wheel failure could result in a machine tip-over.
Component damage may also result if problems
are not discovered and repaired in a timely
fashion.
1
Check all tire treads and sidewalls for cuts,
cracks, punctures and unusual wear.
2
Check each wheel for damage, bends and
cracked welds.
3
Check each lug nut for proper torque. Refer to
Specifications, Machine Specifications.
4
Check the air pressure in each tire. Refer to
Specifications, Machine Specifications.
GTH-1048 • GTH-1056
March 2016
Bodily injury hazard. An
over-inflated tire can explode
and could cause death or
serious injury.
Tip-over hazard. Do not use
temporary flat tire repair
products.
Part No. 123701
Courtesy of Crane.Market

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gth-1056

Table of Contents