Genie GTH-1048 Service Manual page 93

March 2016
6 Tag, disconnect and plug the hydraulic pump
high pressure line at the function manifold.
Cap the fitting.
Bodily injury hazard. Spraying
hydraulic oil can penetrate and
burn skin. Loosen hydraulic
connections very slowly to allow
the oil pressure to dissipate
gradually. Do not allow oil to
squirt or spray.
Component damage hazard.
Hoses can be damaged if they
are kinked or pinched.
7 Tag, disconnect and plug the hydraulic pump
supply line at the pump. Cap the orifice on the
pump.
8 Remove the fasteners securing the
transmission mounting flange to the chassis.
9 Tag and disconnect the driveshafts from the
transmission.
Note: To avoid damage to the driveshaft universal
joints, secure the driveshafts to the chassis.
10 Tag and disconnect the wiring harness from
the transmission.
11 Attach a lifting strap from an overhead crane
to the center point of the transmission.
12 Remove the fasteners securing the
transmission mounting flange to the chassis.
Remove the transmission from the machine.
Crushing hazard. The
transmission will fall if not
properly supported when
removed from the machine.
Part No. 123701
GTH-1048 • GTH-1056
Service Manual
Transmission
81
Courtesy of Crane.Market