wtw Cond 3310 IDS Operating Manual page 31

Cond 3310 IDS
Setting menu
LR 925/01
ba77051e04 07/2017
Menu item
Cell const. man
Temp. comp. (TC) /
Method
Temp. comp. (TC) /
Linear coeff.
Temp. comp. (TC) /
Reference temp.
Multiplier for TDS
Reset
Menu item
Cell constant
Temp. comp. (TC) /
Method
Temp. comp. (TC) /
Linear coeff.
Possible Explanation
setting
0.450 ... Display and setting options for
0.475 ... the manually adjustable cell con-
-1
0.500 cm stant.
This menu item is only available
when Type man is set.
nLF Procedure for temperature com-
Lin pensation (see section 5.2 T
off
PERATURE COMPENSATION
26).
This setting is only available for
the measured parameters, con-
ductivity (ϰ) and resistivity (ρ).
0.000 ... Coefficient of the linear tempera-
2.000 ... ture compensation.
3.000 %/K This menu item is only available
when the linear temperature
compensation is set.
20 °C Reference temperature
25 °C This setting is only available for
the measured parameters, con-
ductivity (ϰ) and resistivity (ρ).
0,40 ... 1,00 Multiplier for TDS value
- Resets all sensor settings to the
delivery condition (see section
6.3.1 R
MENT SETTINGS
Possible Explanation
setting
0.090 ... Display and setting options for the
0.100 ... cell constant
-1
0.110 cm
nLF Procedure for temperature com-
Lin pensation (see section 5.2 T
off
ATURE COMPENSATION
This setting is only available for the
measured parameters, conductivity
(ϰ) and resistivity (ρ).
0.000 ... Coefficient of the linear tempera-
2.000 ... ture compensation.
3.000 %/K This menu item is only available
when the linear temperature com-
pensation is set.
Settings
, page
ESETTING THE MEASURE
, page 35).
EMPER
, page 26).
-
EM
-
-
31