Erasing A Differential Sensor; Adjusting The Settings For Sensors/Differential Sensors - wtw System 2020 XT Operating Manual

Settings/setup
5 - 8

5.5.2 Erasing a differential sensor

If a differential sensor is no longer required, it can be erased from the
list of sensors.
1 Using <S>, open the
2 Using <> and <OK>, select and confirm the menu
System settings
item,
Settings of sensors and diff. sensors
The
3 Press <> to highlight the
<OK>.
4 Press <> to highlight a differential sensor and confirm
with <OK>.
Fig. 5-7 140 - Settings of sensors and diff. sensors ->
Erase differential sensor
5 Press <> to select
firm with <OK>.
The differential sensor is erased.

5.5.3 Adjusting the settings for sensors/differential sensors

Sensor settings include the measured parameter, measuring range
and, if necessary, compensations.
General steps for the selection of sensor settings are given
below. Details on sensor settings are given in the operating
manual for the IQ sensor.
System 2020 XT C
Settings
menu.
Settings of sensors and diff. sensors
->
&
column and confirm with
Erase differential sensor
ONNECT
.
display opens.
and con-
ba75970e01 10/2012