Defining The Vs-88Uhd 8X8 Uhd Matrix Switcher - Kramer VS-88UHD User Manual

8x8 uhd matrix switcher
Hide thumbs Also See for VS-88UHD:
Table of Contents

Advertisement

Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
Defining the VS-88UHD 8x8 UHD
Matrix Switcher
This section defines the VS-88UHD.
#
Feature
The behavior of the front panel buttons and the 7-segment display changes along with the operation
modes. For further details see
IN (PATTERN)
SELECTOR Buttons
OUT (MUTE) SELECTOR
Buttons
MUTE/PATTERN Button
ALL Button
STO and RCL Buttons
ARC Button
D-AUDIO Button
VIDEO Button
LOCK Button
EDID Button
OUTPUT/INPUT
7-segment LED Display
VS-88UHD – Defining the VS-88UHD 8x8 UHD Matrix Switcher
При обращении используйте промокод AND-PDF и получите скидку.
Figure 1: VS-88UHD 8x8 UHD Matrix Switcher Front Panel
Function
Operating VS-88UHD via Front Panel Buttons
Press to select the input (1 to 8) to switch after selecting an output (also
used for storing machine setups in the STO-RCL modes and for selecting a
pattern in the Pattern mode).
Press to select an output (1 to 8) to which the input is routed. Also used for
storing machine presets.
Press to view the current pattern status and select the output/s to which a
pattern is routed.
Press to mute audio or video on a selected output when D-AUDIO and/or
VIDEO buttons are pressed (lit).
Press to perform an action on all outputs (for example setting Mute mode,
Pattern mode and so on).
For switching, press ALL and then a specific IN button to route the selected
input to all outputs. For example, press ALL and then IN 2 to route input 2
to all the outputs.
Press STO to store the current switching setting to a preset button.
Press RCL to recall the switching setting from a preset button.
Press to set ARC mode on the inputs (see
15).
Press to enable digital audio routing. When pressed together with VIDEO,
the digital audio is routed together with the video signal.
Press to select video inputs. When pressed together with D-AUDIO, video
is switched together with audio.
Press and hold (for about 3 seconds) to toggle locking/releasing of the front
panel buttons.
Press to save the following setups: HDCP (On/Off), ARC, Fast Switch and
Switch mode.
Press to capture the EDID.
Displays the selected inputs switched to the outputs (marked above each
input).
Kramer Electronics Ltd.
on page 11.
Operating in ARC Mode
on page
4

Advertisement

Table of Contents
loading

Table of Contents