Review Your Plumbing Configuration - Kinetico Kube Manual

4

Review Your Plumbing Configuration

standard plumbing Configuration
3/8"
supply
line
hot Water Valve
(do not use with
Kube!)
the fittings that are included in the Kube installation kit must be used to install your Kube. If your
plumbing configuration does not look like the picture above, you will need to modify it to get to
a 3/8" configuration. Remember to take the Kube fittings with you to your local hardware store,
along with this manual. a picture is worth a thousand words.
Kube male
adapter
goes here
Kube Female
adapter
Cold Water
goes here
Valve
Kube Fittings
shown Connected
A typical Kube Installation
should look like this:
From Cold
Water line
to Cold
Water
Faucet
4