Taking It With You - Kinetico Kube Manual

Taking It With You

Now that you've enjoyed the benefits of your Kube, be sure to take it
with you when you move by following these simple steps.
1
By-pass Your Kube
Turn the blue by-pass
knob until the white
indicator points to the
by-pass icon
3
Empty Tray
Slide the bottom tray
out and empty it in the
sink. Replace the tray into
system. TIP: Remember
to empty the tray after
every filter change as well
as each time you put Kube
into by-pass mode.
5
Remove Kube Adapters
Remove Kube tubing and adapters.
7
Turn On Water Supply
Turn the cold water back on, and check
connections to ensure there are no leaks.
Note: Please remember to put all of your connection pieces in a small bag for future
reconnection.
.
2
Remove Filters
Remove Kube filters and
place them in the sink
to drain. TIP: Keep the
cartridges upright after
removal from the system
to prevent water from
pouring out.
4
Turn Off Water Supply
Turn off the cold water at the shutoff
valve. Open the faucet to relieve any
pressure.
6
Reconnect Supply Line
Reconnect the cold water supply to
the shutoff valve.
10