Kenmore SENSOR SMART Owner's Manual And Installation Instructions page 8

C. INSTALL GAS LINE (pgs. 15-17)
Tools Needed:
8-inch
or 10-inch
pipe wrench
Flashlight (optional
depending on installation)
8
Pipe-joint
compound
resistant to
L.P. gas
Parts Needed:
Use pipe joint
compound
3 ⁄ -in to 3 ⁄ -in
8 8
pipe elbow
Rigid gas supply line approved for
natural gas use (NOTE: additional
fittings may be required)
3 ⁄ -inch diameter, flexible stainless
8
steel 4-foot or 6-foot gas line
Do not use pipe
joint compound
3 ⁄ -in male
8
pipe-to-flare
(optional depending
on installation)