Kenmore SENSOR SMART Owner's Manual And Installation Instructions page 11

RECESSED AREA/CLOSET
INSTALLATION INSTRUCTIONS
This dryer may be installed in a recessed
area or closet.
The dryer must not be installed where it
can be exposed to water and/or weather.
• Proper operation of dryer cycles
requires temperatures above 45°F (at
lower temperatures, the dryer may not
shut off at the end of automatic cycles
and drying times will be extended).
• Use at least the minimum installation
spacings described on page 12. This
will ensure you have an adequate
clearance for service and proper opera-
tion including flow of combustion and
ventilation air, and that you have a suffi-
cient distance from combustible con-
struction.
• Be sure your location allows for a
proper exhaust installation. A gas
dryer must be exhausted to the
outdoors.
See pages 18-22 for complete exhaust
requirements.
• Check code requirements. Some
codes limit or do not permit installation
of clothes dryers in garages, closets,
mobile homes, or sleeping quarters.
Contact your local building inspector.
WARNING:
To reduce the risk of fire,
this appliance MUST BE EXHAUSTED
OUTDOORS.
NOTE: No fuel-burning appliances may
be installed in the same closet as a dryer.
DRYER DIMENSIONS
Most installations will require at least
5-inch clearance behind the dryer for
the dryer vent.
Location must be large enough to fully
open dryer door.
43 ⁄ in
1
2
28 3 ⁄ in
8
14 3 ⁄ in
1 6
27 in
11