TANNER Scientific TN50 Operating Instructions Manual page 26

8.11 ANTI-ROLL PLATE
Each instrument is equipped with
an anti-roll plate.
To adjust the horizontal position
of the anti-roll plate, turn the
wheel to the left (towards blade)
or right (away from blade).
For pick up of the samples, turn
the anti-roll plate sidewards with
the help of the knob.
In this case, make sure that the
anti-roll-plate is folded into the
horizontal position when it is
unfolded in order to prevent a
one-sided warm-up.
i
For height adjustment of the anti-roll-plate, it is recommended to
adjust the correct height during cutting.
Operating Instructions – TN50
Horizontal adjustment of anti-roll plate
26