TANNER Scientific TN50 Operating Instructions Manual page 35

10.4 CLEANING OF DISPOSABLE BLADE HOLDER
Turn the handwheel to the highest
position and operate the handwheel lock.
Loosen the blade by turning the lever
counterclockwise.
Remove the blade from the blade holder
using the ejection mechanism. Loosen the
upper part of the blade holder by turning
the upper lever counterclockwise. Slide
the top of the blade holder to the right.
Remove the pressure plate and clean the
blade holder with a brush or cloth
Reassemble the pressure plate and the
lever in reverse order and release the
handwheel lock for cutting.
Operating Instructions – TN50
Pull out the lever and release the upper blade
holder.
Remove the pressure plate
35