TANNER Scientific TN50 Operating Instructions Manual page 29

Picture 2:
Slide the UV lamp as shown into the glass bulb. Keep 2 cm space before the
endposition will be reached, this place will be needed to connect the UV-lamp with
the connecting plug. (Pic. 2 & 3)
Picture 4:
The connector can be plugged into two
directions of polarity, a switch is
excluded.
Picture 6:
Once the plug is connected to the UV-lamp, the final step can be done now and the
UV-lamp unit can clip into the retaining clips.
Operating Instructions – TN50
Picture 3:
Picture 5:
Picture 7:
29