Cleaning And Maintenance - TANNER Scientific TN50 Operating Instructions Manual

10. CLEANING AND MAINTENANCE

10.1 CLEANING
The recommended frequency of cleaning of the cryostat chamber depends on how
frequently the instrument is used.
Wear protective clothing and disposable gloves according to Good
Laboratory Practices.
Please take note of the safety aspects of the instrument.
Do not use acetone or xylene for cleaning the unit. Only use alcoholic
media.
Never spray or use cleaning medium directly onto the touch panels.
10.2 DISINFECTION
Spray disinfection with alcohol-based disinfectants is applicable without removing the
microtome from the cryochamber. When disinfecting the instrument, take appropriate
protective measures (gloves, mask, protective clothing, etc.).
Wear protective clothing and disposable gloves according to Good
Laboratory Practices.
When using detergents and disinfectants please comply with the safety
precautions of the disinfectant manufacturer!
The integrated anti-roll plate of the blade holder can be cleaned with
alcohol.
Dispose of waste liquid according to the waste disposal regulations!
Do not turn the instrument on before the cryochamber and the
microtome are completely dry otherwise ice built up can damage
mechanical parts.
All components removed from the cryostat must be carefully dried before
returning them to the cryochamber!
Operating Instructions – TN50
33