SureCall FLARE 3.0 User Manual

SureCall FLARE 3.0 User Manual

Cellular signal booster kit with combined booster and indoor antenna
Hide thumbs Also See for FLARE 3.0:

Advertisement

Quick Links

FLARE
3.0
Cellular signal booster kit with combined
booster and indoor antenna
User Guide
10.26.2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FLARE 3.0 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SureCall FLARE 3.0

  • Page 1 FLARE ™ Cellular signal booster kit with combined booster and indoor antenna User Guide 10.26.2018...
  • Page 2: Table Of Contents

    Introduction TABLE OF CONTENTS Thank you for purchasing SureCall’s Flare 3.0 cellular signal booster kit. SureCall’s Flare 3.0 was specifically designed to eliminate frustrations over dropped calls and limited range by amplifying incoming and outgoing cellular signals in homes How it works ............................4 and offices.
  • Page 3: How It Works

    The booster amplifies outgoing cell signal back to the tower. Purchase Date: __________________________________________________________ Keep the carton and packing material to store the product in case you need to return. Your Flare 3.0 signal booster pack- age includes the following items: SureCall Flare 3.0 signal booster...
  • Page 4: Before Installation

    -50 dB means you have excellent signal strength Step 3. Place the Flare 3.0 on a table or desktop, center of the area where signal is needed. Step 4. Connect the booster to an AC power source.
  • Page 5: Step 3. Place The Booster

    Fixed stations operating in the 1710-1755 MHz band are limited to a maximum antenna height of 10 meters above ground. This booster should not be used near open fire or flame. Storage and transportation: Store and place in non-extreme room-temperature and dry environment. SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com...
  • Page 6: If You Want To Improve Performance

    Resolution • See more tips and tricks or contact us at www.SureCall.com/support Signal booster has no power Connect the power supply to an alternate power source. Be sure the power source is not controlled by a switch that can remove power from the outlet.
  • Page 7: Specifications

    4 dBi / 5 dBi *Note: The Flare 3.0 booster is suitable for use with all equivalent and lower gain antennas, as well as, equivalent or greater lengths of cable. Warning: Any product modifications that use unauthorized antennas, cables, and/or coupling devices are prohibited by the FCC. Contact FCC for details: 1-888-CALL-FCC.
  • Page 8: Consumer Guidelines

    Au Canada, AVANT DE L’UTILISER vous devez répondre à toutes les exigences ISED CPC-2-1-05 SureCall warrants to the Buyer that each of its products, when shipped, will be free from defects in material and workmanship, and will perform in full accordance Vous DEVEZ utiliser ce dispositif avec les antennes et les câbles autorisés, tel que le spécifie le fabricant.
  • Page 9 SureCall, Inc 48346 Milmont Drive Fremont, California 94538, USA 888.365.6283 | www.surecall.com...

This manual is also suitable for:

Flare

Table of Contents