SureCall Fusion4Home User Manual
Omni /panel cellular booster kit
Hide thumbs
Also See for Fusion4Home:
- User manual (20 pages) ,
- Quick start manual (18 pages) ,
- Quick install manual (2 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for SureCall Fusion4Home
Summary of Contents for SureCall Fusion4Home
- Page 1 Fusion4Home Omni / Panel ™ Cellular Booster Kit User Guide...
- Page 2 Introduction Thank you for purchasing SureCall’s Fusion4Home cellular signal booster kit. SureCall’s Fusion4Home was specifically designed to eliminate frustrations over dropped calls and limited range by amplifying incoming and outgoing cellular signals in homes and offices. If you have any questions during setup, please reach out to our US-based experienced support technicians: Call: 1-888-365-6283 Email: support@surecall.com...
-
Page 3: Table Of Contents
TROUBLESHOOTING ........................12 SPECIFICATIONS ..........................12 Kitting Information ......................... 13 FCC & IC INFORMATION ........................14 WARRANTY ............................15 Three-Year Product Warranty ......................15 Limitations of Warranty, Damages and Liability ................15 SureCall, Inc | 1-888-365-6283 | support@surecall.com | www.surecall.com... -
Page 4: How It Works
Turn over the signal booster and record the model and serial number for reference: Serial #: ________________________________________________________________ Purchase Date: __________________________________________________________ Keep the carton and packing material to store the product in case you need to return. SureCall, Inc | 1-888-365-6283 | support@surecall.com | www.surecall.com... - Page 5 Unauthorized antennas, cables, and/or coupling devices are prohibited by FCC new rules. Please contact FCC for details: 1-888-CALL-FCC. Changes or modifications not expressly approved by SureCall could void the user’s authority to operate the equipment. SureCall, Inc | 1-888-365-6283 | support@surecall.com | www.surecall.com...
-
Page 6: Before Installation
Decibels are measured in the negatives and a score closer to zero indicates you have a better signal. A signal of -120 dB indicates you have no service, while a score of about -50 dB means you have excellent signal strength For specific dB signal measurements, use the methods below. SureCall, Inc | 1-888-365-6283 | support@surecall.com | www.surecall.com... -
Page 7: Step 2. Install The Outside Antenna
In this order, place washer, lock washer and nut on each screw and tighten until secure. When tightening screw, sleeve will expand to secure plate. Use provided screws to secure antenna base onto horizontal plate. Pole-mount hardware SureCall, Inc | 1-888-365-6283 | support@surecall.com | www.surecall.com... -
Page 8: Step 3. Install The Booster And Inside Antenna
This booster should not be used near open fire or flame. Storage and transportation: Store and place in non-extreme room-temperature and dry environment. Panel Antenna Installation SureCall’s Inside panel antennas are directional with a 120˚ reach. They should be mounted facing the area signal is needed and away from the outdoor antenna (See “Aiming Directional Antennas” on page 6). -
Page 9: Step 4: Connect To Power And Turn On
Increase the distance between the booster and outside antenna - vertical separation is most effective. • If using an omni outside antenna, upgrade to a directional yagi antenna that can be aimed toward your closest tower. SureCall, Inc | 1-888-365-6283 | support@surecall.com | www.surecall.com... - Page 10 Booster Diagram Note: Changes or modifications not expressly approved by SureCall could void user’s authority to operate the equipment. This booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the booster, cause personal injury, and void your warranty.
-
Page 11: Led Indicators
(example: outside Yagi antenna and inside panel antenna), ensure that they are facing away from one another. If condition continues, lower the dB gain setting in small increments until the light turns off or flashes yellow. SureCall, Inc | 1-888-365-6283 | support@surecall.com | www.surecall.com... -
Page 12: Troubleshooting
Verify that the power source is not controlled by a switch that has removed power from the outlet. If the POWER LED on the signal booster is OFF, return the power supply to SureCall. Contact tech support to receive an RMA at: 1-888-365-6283 or support@surecall.com After completing Verify that cable connections are tightly fitted to the booster and antenna. -
Page 13: Kitting Information
3 dBi / 3 dBi SC-302W 2.5 dBi 2.5 dBi 3 dBi 5 dBi 4 dBi / 5 dBi * All equivalent antennas and cables are suitable for use with the Fusion4Home SureCall, Inc | 1-888-365-6283 | support@surecall.com | www.surecall.com... -
Page 14: Fcc & Ic Information
Une telle réduction doit porter sur la puissance d’entrée ou sur le gain, et ne doit pas se faire au moyen d’un atténuateur raccordé à la sortie du dispositif SureCall, Inc | 1-888-365-6283 | support@surecall.com | www.surecall.com... -
Page 15: Warranty
Buyers may obtain an RMA number for warranty returns by calling the SureCall Return Department toll-free at 1-888-365-6283. Any returns received by SureCall without an RMA number clearly printed on the outside of the shipping container will be returned to sender. In order to receive full credit for signal boosters, all accessories originally included in the signal booster box must be returned with the signal booster. - Page 16 SureCall, Inc 48346 Milmont Drive Fremont, California 94538, USA 888.365.6283 | www.surecall.com This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters.
Need help?
Do you have a question about the Fusion4Home and is the answer not in the manual?
Questions and answers