SureCall Flare User Manual
Cellular signal booster kit with combined booster and indoor antenna
Hide thumbs
Also See for Flare:
- User manual (9 pages) ,
- User manual (8 pages) ,
- Installation manual (3 pages)
Table of Contents
Related Manuals for SureCall Flare
Summary of Contents for SureCall Flare
- Page 1 ™ Cellular signal booster kit with combined booster and indoor antenna • Flare Omni kit for voice & 4G data (US) • Flare Yagi kit for voice & 4G data (CANADA) • Flare-C Yagi kit for voice & text signal (CANADA)
- Page 2 Introduction Thank you for purchasing SureCall’s Flare cellular signal booster kit. SureCall’s Flare was specifically designed to eliminate frustrations over dropped calls and limited range by amplifying incoming and outgoing cellular signals in homes and offices. If you have any questions during setup, please reach out to our US-based experienced support technicians: Call: 1-888-365-6283 Email: support@surecall.com...
-
Page 3: Table Of Contents
FLARE SPECIFICATIONS ........................11 Kitting Information ......................... 12 FCC & IC INFORMATION ........................14 WARRANTY ............................15 Three-Year Product Warranty ......................15 Limitations of Warranty, Damages and Liability ................15 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | support@surecall.com... -
Page 4: How It Works
The booster amplifies outgoing cell signal back to the tower. Outside Yagi Antenna (b) Outside Omni Antenna (a) Booster Cable Power Supply How the SureCall Flare Booster Works SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | support@surecall.com... -
Page 5: Package Contents
Turn over the signal booster and record the model and serial number for reference: Serial #: ________________________________________________________________ Purchase Date: __________________________________________________________ Keep the carton and packing material to store the product in case you need to return. Your Flare signal booster package includes the following items: SureCall Flare signal booster... -
Page 6: Before Installation
Step 1. Find the outside area with the strongest signal. Step 2. Install the outside antenna Step 3. Place the Flare on a table or desktop, center of the area where signal is needed. Step 4. Connect the booster to an AC power source. -
Page 7: Step 2. Install The Outside Antenna
Note: Alternate screws may be required for differing surfaces such as wood or concrete. Outside Antenna L-Bracket Planned Booster Location Cable Cable Screws Nuts & Anchors / Washers Sleeves Omni Outside Antenna Install Illustration SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | support@surecall.com... - Page 8 RG6 cable and tighten the connection. Run the Outside Antenna Assembly cable along route to planned location of your booster. Outside Antenna Planned Booster Location Cable Omni Yagi Antenna Install Illustration SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | support@surecall.com...
-
Page 9: Step 3. Place The Booster
Remember: Bars are not always a reliable measure of Connecting the Power Supply signal. The best way to confirm signal coverage is the ability to place and hold a call. SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | support@surecall.com... -
Page 10: If You Want To Improve Performance
If using an omni outside antenna, upgrade to a directional yagi antenna that can be aimed toward your closest tower. Please Note: Changes or modifications not expressly approved by SureCall could void user’s authority to operate the equipment. LED INDICATORS... -
Page 11: Flare Specifications
Be sure the power source is not controlled by a switch that can remove power from the outlet. Check the POWER LED () on the signal booster. If it is OFF, return the power supply to SureCall. Contact tech support at to receive an RMA at: 1-888-365-6283 or support@surecall.com, or go to www.surecall.com 7:00 AM –... -
Page 12: Kitting Information
2.5 dBi 3 dBi 5 dBi 4 dBi / 5 dBi * The Flare booster is suitable for use with all equivalent and lower gain antennas, as well as, equivalent or greater lengths of cable. Frequency (MHz) Bandwidth (MHz) Input (dBm) - Page 13 *Input power level is decreased before reaching AGC -0.5 dB to maintain compliance with the intermodulation product of -13 dBm. Mean power: Measurements obtained on section 6.2 where Pmean = P01+3 dB SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | support@surecall.com...
-
Page 14: Fcc & Ic Information
Une telle réduction doit porter sur la puissance d’entrée ou sur le gain, et ne doit pas se faire au moyen d’un atténuateur raccordé à la sortie du dispositif SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | support@surecall.com... -
Page 15: Warranty
Buyers may obtain an RMA number for warranty returns by calling the SureCall Return Department toll-free at 1-888-365-6283. Any returns received by SureCall without an RMA number clearly printed on the outside of the shipping container will be returned to sender. In order to receive full credit for signal boosters, all accessories originally included in the signal booster box must be returned with the signal booster. - Page 16 SureCall, Inc 48346 Milmont Drive Fremont, California 94538, USA 888.365.6283 | www.surecall.com This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters.
Need help?
Do you have a question about the Flare and is the answer not in the manual?
Questions and answers