Table of Contents
Advertisement
This guide explains how to install a K-POE-4BAY PoE shelf for use with a K10 or K6 chassis. This
guide also provides information on how to contact Enterasys Networks for additional help.
Who Should Use This Guide
This guide is intended for a network administrator who is responsible for installing and setting up
the K-Series K-POE-4BAY PoE shelf.
How to Use This Guide
Read through this guide completely before installing a K-POE-4BAY PoE shelf.
To locate information about various subjects in this guide, refer to the following table.
For...
An overview of the K-POE-4BAY PoE shelf
Instructions for installing the K-POE-4BAY PoE shelf
Instructions for installing a power supply in the K-POE-4BAY
PoE shelf
Specifications and regulatory compliance information
Related Documents
The manuals listed below can be obtained from the World Wide Web in Adobe Acrobat Portable
Document Format (PDF) at the following site:
https://extranet.enterasys.com/downloads
Electrical Hazard: Only qualified personnel should install or service this unit.
Riesgo Electrico: Nada mas personal capacitado debe de instalar o darle servicio a esta unida.
Elektrischer Gefahrenhinweis: Installationen oder Servicearbeiten sollten nur durch
ausgebildetes und qualifiziertes Personal vorgenommen werden.
About This Guide
Refer to...
Chapter
Chapter
Chapter
Appendix
Regulatory Compliance
Enterasys K-Series K-POE-4BAY PoE Shelf Hardware Installation Guide xiii
1,
Introduction
2,
Installing the PoE Shelf
3,
Installing a Power Supply
A,
Specifications and
Advertisement
Table of Contents
