Table of Contents
Advertisement
Quick Start Guide
Prestigio MultiBoard
Wireless installation
1� Switch on your router before starting the network installation�
2� Plug the POWER cord and switch on the power�
3� Press
to turn the power on�
4� Press INPUT switch to PC/Android source�
5� Detected Wi-Fi networks will be listed in the Wi-Fi networks section on the right-hand
corner of the status bar�
6� Tap the desired Wi-Fi network you want to connect�
- If you selected a secured network, you'll be asked to enter the network key or password�
• A wireless LAN connection and performance cannot be guaranteed for all
residential environments� In the following cases, the wireless LAN signal may be
poor or drop, or the connection speed may become slow�
- When used in buildings made with concrete, reinforced steel, or metal�
- When placed near objects that obstruct the signal�
- When used with other wireless devices that emit the same frequency�
- When used in the vicinity of microwave ovens and other devices that emit a
magnetic field, electrostatic charge, or electromagnetic interference�
• Make sure the firewall in your network allows access to the MultiBoard wireless
connection�
• Operations cannot be guaranteed when used with access points that do not have
Wi-Fi® certification�
• A wireless LAN access point is required to connect the MultiBoard to the Internet
using a wireless LAN� See the operation manual of your access point for setup�
• A stable connection speed is required to play back streaming content� Use a wired
connection if the wireless LAN speed is unstable�
EN - 17
2016/12/01
Hide quick links:
Advertisement
Table of Contents
