Converting Writing To Text - Intermec CN2B User Manual

Chapter 2 — Windows Mobile 2003
Select the text to convert, then tap Recognize
on the pop-up menu
28

Converting Writing to Text

You can convert words you write in print or cursive to text by tapping
Tools > Recognize. If a word is not recognized, it keeps its original form.
To convert only certain words, tap Pen to disable the writing function, tap
twice over the word or phrase to highlight, then tap Tools > Recognize.
If the conversion is incorrect, you can choose different words from a list of
alternates or return to the original writing. To do so, tap and hold the
incorrect word (tap one word at a time). On the pop-up menu, tap Alter-
nates. Tap the word use from the menu with a list of alternate words, or tap
the writing at the top of the menu to return to the original writing.
Tips for getting good recognition:
• Write neatly.
• Write on the lines and draw descenders below the line. Write the cross of
the "t" and apostrophes below the top line so they are not confused with
the word above. Write periods and commas above the baseline.
• For better recognition, increase the zoom level to 300% by using the
Tools menu. Recognition does not work well below a 150% zoom level.
The writing is turned to text
Tap to disable the Pen function
Tap to return to your original writing
Or tap the word you want to use
CN2B Mobile Computer User's Manual