Converting Writing To Text - Intermec CN3 User Manual

CN3 Mobile Computer User's Manual - PRELIMINARY
You can cut, copy, and paste written text in the same way you work with
typed text: tap and hold the selected words and then tap an editing com-
mand on the pop-up menu, or tap the command under Menu.

Converting Writing to Text

You can convert words you write in print or cursive to text by tapping
Menu > Tools > Recognize. If a word is not recognized, it stays in its origi-
nal form.
If you want to convert only certain words, tap Pen to disable the writing
function, tap twice over the word or phrase to highlight, then tap Menu >
Tools > Recognize.
Before Recognition
If the conversion is incorrect, you can choose different words from a list of
alternates or return to the original writing. To do so, tap and hold the
incorrect word (tap one word at a time). On the pop-up menu, tap Alter-
nates. Tap the word use from the menu with a list of alternate words, or tap
the writing at the top of the menu to return to the original writing.
Tips for getting good recognition:
• Write neatly.
• Write on the lines and draw descenders below the line. Write the cross of
the "t" and apostrophes below the top line so they are not confused with
the word above. Write periods and commas above the baseline.
Chapter 2 — Windows Mobile
After Recognition
Tap to return to the original writing
Or tap the word you want to use
29