Supermicro X10DRG-O+-CPU User Manual page 3

This manual is written for system integrators, IT professionals, and
knowledgeable end users. It provides information for the installation and use of the
X10DRG-O+-CPU/X10DRG-OT+-CPU motherboard.
About This Motherboard
The Supermicro X10DRG-O+-CPU/X10DRG-OT+-CPU motherboard supports
dual Intel® E5-2600v3/v4 Series processors (Socket R3) that offer the new Intel®
Microarchitecture 22nm (E5-2600v3)/14nm (E5-2600v4) Processing Technology,
delivering the most balanced solution in performance, power effi ciency, and features
to address the diverse needs of next-generation data centers. With the PCH C612
built in, the X10DRG-O+-CPU/X10DRG-OT+-CPU supports Intel® Node Manager
3.0 and Management Engine (ME) technologies. This motherboard is optimized for
High-Performance Computing (HPC) or VDI platforms. Please refer to our website
(http://www.supermicro.com) for CPU and memory support updates.
Manual Organization
Chapter 1 describes the features, specifi cations, and performance of the mother-
board. It also provides detailed information about the Intel® PCH C612 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules, and other hardware components into the
system. If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS setup utility.
Appendix A provides BIOS error beep codes.
Appendix B lists software installation instructions.
Appendix C contains UEFI BIOS recovery instructions.
Preface
iii
Preface