Table of Contents
Advertisement
4.4 Ceiling brackets, standard with or without lock
Ceiling brackets with visible fixing parts.
Outer dimensions of bracket (70x146), (120x146 ) and (30x146) x 14 mm.
Used for ceiling installation of single-rail and traverse systems.
(70x146) ordinary ceiling suspension,
(120x146) rail coupling,
(30x146) curved rails.
To be installed as described in the installation instructions.
Ceiling bracket, standard with lock screw.
Ceiling bracket with lock screw measuring (70x146).
Used for ceiling installation, with min. 1 per straight rail.
This ensures that the rail is not displaced after installation.
To be installed as described in the installation instructions.
4.5 Shim's
Shim for ceiling bracket:
Available in the following dimensions for ceiling bracket, quick:
Width 30, 70, and 120 mm
•
1 mm thick
•
3 mm thick
•
5 mm thick
Available in the following dimensions for ceiling bracket, standard:
Width 30, 70, and 120 mm
•
1 mm thick
•
3 mm thick
•
5 mm thick
To be used in installations to compensate for possible differences of
the height in the roof/ceiling structure.
The shim's are supplied in white or anodized in natural.
4.6 Wall brackets, end hung
The wall brackets are used when mounting rails to a wall.
Can be used when the walls have sufficiently high carrying capacity when
mounting straight and diagonally to a wall.
To be used with insert tubes and console.
To be installed as described in the installation instructions, section 5.3.
The wall brackets are supplied in white or anodized in natural.
4.6.1 Wall brackets, side hung
To be used when installing with side hung brackets.
Can be applied if the wall has sufficient strength.
The bracket can be supplied in both grey and white.
To be installed as described in the installation instructions, section 5.3.
11
Advertisement
Table of Contents
