Eaton ePDU G3 Operating Manual page 70

Main Menu Main Menu
Active Alarms
Alarms History
Meters
Control
Settings
ePDU Info
Figure 66. Example Load NMC File
NOTE 1
The eNMC/upgrade/hw directory contains only one file named epdu_cfg*.xml.
NOTE 2 The epdu_cfg*.xml file shall be compatible with the ePDU part number.
Upgrade the eNMC Module Firmware using USB
To upgrade the eNMC module firmware:
1. Go to www.eaton.com/ePDU.
Enter the ePDU part number of your model in the ePDU Part Number Search field and click Search.The
2.
product Web page displays.
1. Select the Options tab and click either the ePDU Firmware link or the free download link. The Download -
ePDU Software Tools and MIBs page displays.
2. Click the link to the firmware upgrade file for your model in the column named ePDU Firmware (Advanced
Monitored, Switched, and Managed ePDUs) and save the file to your computer.
NOTE The file is named Image*.bin.
3. Connect a USB drive to your computer and put the Image*.bin file in the eNMC/upgrade/ location on the
USB drive root directory (see Figure 67).
Figure 67. Root Directory of Flash Disk
NOTE There can only be one Image*.bin file in the eNMC/upgrade directory on your USB
drive.
4. Make sure eNMC module is powered ON.
5. Insert the flash drive in the USB port of the eNMC front panel.
Settings
USB Flash Mode
LCD
Display
Daisy Chain
Language
IPv4
Factory
Main Menu
USB Flash Mode
Save Config.
Load Config .
Upgrade F/W
Save eNMC file
Load eNMC file
Exit
Eaton ePDU G3 Operation Manual P-164000277—Rev 5
LCD Interface Operation
61