8.
In the Network Management Card panel, check Firmware upgrade enabled and click Browse to find the
upgrade file.
Figure 91. System Settings Page
From the Open window, select the Image<xxx>.bin file, and click Open.
9.
10. In the Network Management Card panel, click Upgrade Network Management Card to launch the
upload. A progress bar shows the progress of the update.
Do not disturb the upgrade until the progress bar shows complete.
11. When finished, a message displays and the communications module restarts automatically. The upgrade
takes four to five minutes. When the upgrade completes, refresh the Web pages.
CAUTION
Eaton ePDU G3 Operation Manual P-164000277—Rev 5
Maintenance and Alarms
123