Eaton ePDU G3 Operating Manual page 34

NOTE
You can also configure up to four 902 mm (35.5 in) ePDUs on a rail, with up to two
ePDUs secured by brackets on the top and upper mounting rail, and up to two
ePDUs secured by brackets on the lower and bottom mounting rails.
For Multiple 902 mm G3 ePDUs
Top Mounting Rail
8-32 screw and
keps nut
10-32 screw and
keps nut
Upper Mounting Rail
FRONT
Lower Mounting Rail
Existing screws
in the U-channel
Bottom Mounting Rail
Figure 22. Multiple 902 mm Inboard
Clip Feet Turned Upward for
Top Mounting Rail
Clip Feet Turned Upward for
Upper Mounting Rail
Clip Feet Turned Downward for
Lower Mounting Rail
Clip Feet Turned Downward for
Bottom Mounting Rail
Eaton ePDU G3 Operation Manual P-164000277—Rev 5
Installation
25