Review Detector Address; Review Event Log - Honeywell Midas User Manual

7.1.7 Review Detector Address ' nEt'
1. Select the review address '
press '3' to accept.
2. 'WA Y' or 'WA n' is displayed depending on
whether full web access or read only has been
selected.
3. 'AU Y' or 'AU n' is displayed depending on if auto
address detection is on (AU Y) or off (AU n).
4. Press '3' to display the first part of the IP address
preceded by the letter 'A'.
5. The dot on the upper left indicates that the first
part of the IP address is being displayed.
6. Press '3' to display the second part of the
address. The two dots on the upper left indicate
the 2nd portion of the address.
7. Press '3' again to display the third part and again
to display the last part of the address.
8. Press '3' and the first part of the sub net mask
values will be displayed preceded by the letter 'n'.
9. Press '3' to scroll through the second, third and
forth sub net values. The number of dots in the
upper left indicate which part of the sub net
address is being viewed.
10. Press '3' to return to step 1.
11. Repeat steps 1 through 9 to view the settings
again or press 's' up or 't' down to select
another submenu.
12. Press 'X' to return to normal operation.

7.1.8 Review Event Log '

nEt' submenu and 1. Select the review event log '
2. The number of logged data events available is
3. Press '3' to view the date of the last recorded
4. Press '3' to display the time of the event.
5. Press '3' again to display the relevant alarm icon
6. Repeat to view next logged event details.
7. Press 'X' to return to normal operation.
Note
7-5
Midas
indicated by the number of dots (0-7) shown on
the left of the display.
event.
and event code.
More detailed event log information can be
viewed using the web browser feature. Refer
to Section 13 for further details
Gas Detector
®
Hi St'
Hi St' submenu.