4�1 Mounting And Location Of Detector - Honeywell Midas User Manual

4 Installation
For ease of installation Midas
to allow the installation of the mounting bracket
assembly and terminal module separately from the
other parts of the detector. The detector location and
hard wiring can therefore be completed before fitting
the detector's main chassis and sensor cartridge.
WARNING
Midas is designed for installation and use in
®
indoor safe area non-explosive atmospheres.
Installation must be in accordance with the
recognized standards of the appropriate
authority in the country concerned. Prior
to carrying out any installation ensure local
regulations and site procedures are followed.
Diagram 4-1. Midas outline dimensions
®
MDA Scientific Midas
honeywell
PN: MIDAS-E-CDX
SN: 12K-48397
Activate by 24-Nov-12
honeywell
2.48 in [63.00]
has been designed
®
5.91 in [150.00mm]
z
zellweger analytics
GAS DETECTOR
Midas
4.1 Mounting and Location of Detector
The Midas gas detector has an integral mounting
®
bracket assembly that is easily mounted to a
suitable vertical surface such as a wall, tool housing,
mounting plate on a pole etc.
Note
4.72 in [120.00mm]
4-2
Gas Detector
®
Drill Template
Drill 2 x
M4 holes
2.3 in
(58.50mm)
This drill template is not to scale.
The Midas Quick Start Guide
(MIDAS-A-020) contains a full
scale drawing.
Ensure all measurements are
correct before using as an actual
drill template.
Use 2 x M4 Screws or equivalent
for mounting (head size 6-12
mm (1/4" - 1/2"))