Page 1
I N S T A L L A T I O N I N S T R U C T I O N S Instrucciones de instalación Istruzioni di installazione Installationsanleitung Installatie-instructies Instruções de Instalação Instructions d´installation Extra Large Height Adjustable Video Cart Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description XPA1U...
AN ACCESSORY is the secondary Chief instability causing tip over resulting in death or serious injury. product which is attached to a primary Chief product, and may See Figure below for reference. have a component attached or setting on it.
NOT relocate audio and/or video equipment to the cart! NOTE: The XPA1U cart has no user serviceable parts. NOTE: The XPA1U cart can support screen sizes up to a maximum of 100" wide. NOTE: The XPA1U cart may be used with the UL Listed FCA624 Dual Monitor Extension Accessory.
Page 4
XPA1U Installation Instructions LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación...
Installation Instructions XPA1U TOOLS REQUIRED FOR INSTALLATION 1/2" (deep) 1/8” (included) 3/16” (included) PARTS H (1) [Hardware bag] HB (6) HC (6) HA (8) A (4) M4x25mm M4x20mm M4x16mm [Upright cover] B (2) [Interface upright] HD (6) HE (6) HF (6)
XPA1U Installation Instructions Assembly And Installation (L) x 4 CAUTION: Attachment holes may be damaged if a power drill is used to insert button head cap screws. Screws should first be inserted and turned BY HAND with the hex key or with a hand-held screwdriver BEFORE using the hex head drill bit and power drill to complete the attachment.
It is the holes. installer’s responsibility to make sure the combined weight of all accessories and components attached to the XPA1U head Select screw length: (See Figure 3) assembly up to (and including) the display does not exceed •...
Page 8
XPA1U Installation Instructions Move latches on interface uprights to the “closed” position to secure display to head assembly. (See Figure 6) WARNING: Display may be very heavy! Ensure display may be safely lifted and maneuvered as required to install on cart.
Page 9
Installation Instructions XPA1U Component Bracket Installation (Optional) Install components to component bracket as desired using cable ties (Q), cable clips (U) or screws. (See Figure 9) NOTE: Component bracket may be installed to either side of NOTE: Component bracket is designed to mount small audio/ column.
XPA1U Installation Instructions Handle Installation Cover Removal/Access/Re-install Loosely install two 1/4-20 x 5/8" Phillips pan machine NOTE: The front cover comes with four button head cap screws (X) through holes in each handle (S) and into slide screws installed to provide additional security. But to nut (V).
Installation Instructions XPA1U Cable Management Route cables from display through inside of column assembly attaching at cable management attachment points and/or accessory bracket using cable ties (Q) or NOTE: The following cable management options may vary cable clips (U) as desired. (See Figure 17)
Page 12
XPA1U Installation Instructions Adjustments Pitch Adjustment Height Adjustment WARNING: Removing pitch adjustment screws when the Loosen two stability knobs on either side of head assembly. display is installed will result in the display falling from the (See Figure 19) mount! Do NOT remove pitch adjustment screws completely Turn height adjustment knob clockwise to raise display.
Page 13
“open” position. (See Figure 24) NOTE: The XPA1U cart has no user serviceable parts. NOTE: The XPA1U cart can support screen sizes up to a WARNING: DISPLAYS MAY WEIGHT IN EXCESS OF 40 maximum of 100" wide. LBS! Always use two people and proper lifting techniques Always place cart on a level surface.
Page 16
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands P +31 (0) 495 580 852 F +31 (0) 495 580 845 Chief, a products division of Asia Pacific A Office No. 918 on 9/F, Shatin Galleria Milestone AV Technologies 18-24 Shan Mei Street...
Need help?
Do you have a question about the XPA1U and is the answer not in the manual?
Questions and answers